View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2026050000
VPU II 4W+G WYE 347V
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2026050000
VPU II 4W+G WYE 347V
2591270000
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-05-01 |
| Type: | VPU II 4W+G WYE 347V |
| Order No.: | 2026050000 |
| GTIN (EAN): | 4050118405286 |
| Qty.: | 1 pc(s). |
| Width: | 72 mm |
| Width (inches): | 2.835 inch |
| Height: | 94 mm |
| Height (inches): | 3.701 inch |
| Depth: | 69 mm |
| Depth (inches): | 2.717 inch |
| Mounting dimension - height: | 75 mm |
| Net weight: | 532 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| Certificate No. (cURus): | E354261 |
| Continuous voltage UC, max.: | 510 V |
| Rated voltage UN: | 120 / 240 V |
| Rated Voltage UN: | 347 V |
| Test Voltage 39.1 (UL 1449): | 600 V |
| VPR (L/N-PE): | 1,800 V |
| MCOV (L/N-PE): | 510 Vac |
| SCCR: | 200 kA |
| In: | 20 kA |
| Category: | SPD TYPE 1CA/2CA |
| Colour: | black, orange |
| Design: | Installation housing; 4TE, Insta IP 20 |
| Optical function display: | green = OK; red = arrester is defective - replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | without telecomm. contact |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Rated voltage (AC): | 230 V |
| Voltage type: | AC |
| Max. continuous voltage, Uc (AC): | 510 V |
| Discharge current In (8/20µs) wire-PE: | 20 kA |
| Discharge current Imax (8/20µs) wire-PE: | 40 kA |
| Frequency range, max.: | 60 Hz |
| Frequency range, min.: | 50 Hz |
| Fuse: | 125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG |
| Short-circuit current rating ISCCR: | 25 kA |
| Follow-on current extinguishing capability Ifi: | Not available due for technical reasons |
| Protection level Up at IN (L/N-PE): | ≤ 2.1 kV |
| Number of poles: | 4 |
| Requirements category acc. to IEC 61643-11: | Type II |
| Requirements class, acc. to EN 61643-11: | T2 |
| Response time: | ≤ 25 ns |
| Signalling contact: | No |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 15 mm |
| Tightening torque, min.: | 2 Nm |
| Tightening torque, max.: | 3 Nm |
| Wire connection cross section AWG, min.: | AWG 14 |
| Wire connection cross section AWG, max.: | AWG 0 |
| Wire cross-section, solid, min.: | 4 mm² |
| Wire cross-section, solid, max.: | 16 mm² |
| Wire connection cross-section, finely stranded, min.: | 2.5 mm² |
| Wire connection cross section, finely stranded, max.: | 25 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 25 mm² |
| Connection cross-section, stranded, min.: | 4 mm² |
| Connection cross-section, stranded, max.: | 50 mm² |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2020-05-01 |
| Type: | VPU II 4W+G WYE 347V |
| Order No.: | 2026050000 |
| GTIN (EAN): | 4050118405286 |
| Qty.: | 1 pc(s). |
| Width: | 72 mm |
| Width (inches): | 2.835 inch |
| Height: | 94 mm |
| Height (inches): | 3.701 inch |
| Depth: | 69 mm |
| Depth (inches): | 2.717 inch |
| Mounting dimension - height: | 75 mm |
| Net weight: | 532 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...85 °C |
| Certificate No. (cURus): | E354261 |
| Continuous voltage UC, max.: | 510 V |
| Rated voltage UN: | 120 / 240 V |
| Rated Voltage UN: | 347 V |
| Test Voltage 39.1 (UL 1449): | 600 V |
| VPR (L/N-PE): | 1,800 V |
| MCOV (L/N-PE): | 510 Vac |
| SCCR: | 200 kA |
| In: | 20 kA |
| Category: | SPD TYPE 1CA/2CA |
| Colour: | black, orange |
| Design: | Installation housing; 4TE, Insta IP 20 |
| Optical function display: | green = OK; red = arrester is defective - replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | without telecomm. contact |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Rated voltage (AC): | 230 V |
| Voltage type: | AC |
| Max. continuous voltage, Uc (AC): | 510 V |
| Discharge current In (8/20µs) wire-PE: | 20 kA |
| Discharge current Imax (8/20µs) wire-PE: | 40 kA |
| Frequency range, max.: | 60 Hz |
| Frequency range, min.: | 50 Hz |
| Fuse: | 125 A gL > (if back up fuse > 125 A), No Fuse neccessary ≤125 A gG |
| Short-circuit current rating ISCCR: | 25 kA |
| Follow-on current extinguishing capability Ifi: | Not available due for technical reasons |
| Protection level Up at IN (L/N-PE): | ≤ 2.1 kV |
| Number of poles: | 4 |
| Requirements category acc. to IEC 61643-11: | Type II |
| Requirements class, acc. to EN 61643-11: | T2 |
| Response time: | ≤ 25 ns |
| Signalling contact: | No |
| Type of connection: | Screw connection |
| Stripping length, rated connection: | 15 mm |
| Tightening torque, min.: | 2 Nm |
| Tightening torque, max.: | 3 Nm |
| Wire connection cross section AWG, min.: | AWG 14 |
| Wire connection cross section AWG, max.: | AWG 0 |
| Wire cross-section, solid, min.: | 4 mm² |
| Wire cross-section, solid, max.: | 16 mm² |
| Wire connection cross-section, finely stranded, min.: | 2.5 mm² |
| Wire connection cross section, finely stranded, max.: | 25 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 25 mm² |
| Connection cross-section, stranded, min.: | 4 mm² |
| Connection cross-section, stranded, max.: | 50 mm² |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |