1706050000
ZDU 2.5-2/3AN OR
Type: | ZDU 2.5-2/3AN OR |
Order No.: | 1706050000 |
Version: | Feed-through terminal, Tension-clamp connection, 2.5 mm², 800 V, 24 A, orange |
GTIN (EAN): | 4008190915384 |
Qty.: | 100 pc(s). |
Width: | 5.1 mm |
Width (inches): | 0.201 inch |
Height: | 50.5 mm |
Height (inches): | 1.988 inch |
Depth: | 43 mm |
Depth (inches): | 1.693 inch |
Depth including DIN rail: | 44 mm |
Net weight: | 6.63 g |
Operating temperature range: | For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity |
Storage temperature, max.: | 40 °C |
Storage temperature, min.: | 10 °C |
Storage temperature: | 10 °C...40 °C |
Continuous operating temp., min.: | -50 °C |
Continuous operating temp., max.: | 120 °C |
Material: | Wemid |
Colour: | orange |
UL 94 flammability rating: | V-0 |
Certificate No. (ATEX): | DEMKO16ATEX1808U |
Certificate No. (IECEX): | IECEXULD16.0036U |
Max. voltage (ATEX): | 550 V |
Current (ATEX): | 21 A |
Wire cross section max. (ATEX): | 4 mm² |
Max. voltage (IECEX): | 550 V |
Current (IECEX): | 21 A |
Wire cross section max. (IECEX): | 4 mm² |
Operating temperature range: | For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity |
Marking EN 60079-7: | Ex eb II C Gb |
Ex 2014/34/EU label: | II 2 G D |
Version: | Tension-clamp connection, for plug-in cross-connector, One end without connector |
End cover plate required: | Yes |
Number of levels: | 1 |
Number of clamping points per level: | 3 |
Number of potentials per tier: | 1 |
Levels cross-connected internally: | No |
PE connection: | No |
Rail: | TS 35 |
Explosion-tested version: | Yes |
Number of similar terminals: | 1 |
Open sides: | right |
Type of mounting: | Snap-on |
Certificate No. (CSA): | 200039-1194786 |
Current size C (CSA): | 23 A |
Voltage size C (CSA): | 600 V |
Wire cross section max. (CSA): | 14 AWG |
Wire cross section min. (CSA): | 26 AWG |
Blade size: | 0.6 x 3.5 mm |
Clamping range, max.: | 2.5 mm² |
Clamping range, min.: | 0.13 mm² |
Connection direction: | Inclined / angled |
Gauge to IEC 60947-1: | A2 |
Number of connections: | 3 |
Stripping length: | 10 mm |
Type of connection: | Tension-clamp connection |
Wire connection cross section AWG, max.: | AWG 12 |
Wire connection cross section AWG, min.: | AWG 26 |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
Wire connection cross-section, solid core, max.: | 2.5 mm² |
Wire connection cross-section, solid core, min.: | 0.5 mm² |
Rated cross-section: | 2.5 mm² |
Rated voltage: | 800 V |
Rated current: | 24 A |
Current at maximum wires: | 24 A |
Standards: | IEC 60947-7-1 |
Volume resistance according to IEC 60947-7-x: | 1.33 mΩ |
Power loss in accordance with IEC 60947-7-x: | 0.77 W |
Rated impulse withstand voltage: | 8 kV |
Pollution severity: | 3 |
Certificate No. (UR): | E60693 |
Conductor size Factory wiring max. (UR): | 12 AWG |
Conductor size Factory wiring min. (UR): | 26 AWG |
Conductor size Field wiring max. (UR): | 12 AWG |
Conductor size Field wiring min. (UR): | 26 AWG |
Current size C (UR): | 20 A |
Voltage size C (UR): | 600 V |
ETIM 6.0: | EC000897 |
ETIM 7.0: | EC000897 |
eClass 9.0: | 27-14-11-20 |
eClass 9.1: | 27-14-11-20 |
eClass 10.0: | 27-14-11-20 |
UNSPSC: | 30-21-18-11 |
ROHS: | Conform |
Type: | ZDU 2.5-2/3AN OR |
Order No.: | 1706050000 |
Version: | Feed-through terminal, Tension-clamp connection, 2.5 mm², 800 V, 24 A, orange |
GTIN (EAN): | 4008190915384 |
Qty.: | 100 pc(s). |
Width: | 5.1 mm |
Width (inches): | 0.201 inch |
Height: | 50.5 mm |
Height (inches): | 1.988 inch |
Depth: | 43 mm |
Depth (inches): | 1.693 inch |
Depth including DIN rail: | 44 mm |
Net weight: | 6.63 g |
Operating temperature range: | For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity |
Storage temperature, max.: | 40 °C |
Storage temperature, min.: | 10 °C |
Storage temperature: | 10 °C...40 °C |
Continuous operating temp., min.: | -50 °C |
Continuous operating temp., max.: | 120 °C |
Material: | Wemid |
Colour: | orange |
UL 94 flammability rating: | V-0 |
Certificate No. (ATEX): | DEMKO16ATEX1808U |
Certificate No. (IECEX): | IECEXULD16.0036U |
Max. voltage (ATEX): | 550 V |
Current (ATEX): | 21 A |
Wire cross section max. (ATEX): | 4 mm² |
Max. voltage (IECEX): | 550 V |
Current (IECEX): | 21 A |
Wire cross section max. (IECEX): | 4 mm² |
Operating temperature range: | For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity |
Marking EN 60079-7: | Ex eb II C Gb |
Ex 2014/34/EU label: | II 2 G D |
Version: | Tension-clamp connection, for plug-in cross-connector, One end without connector |
End cover plate required: | Yes |
Number of levels: | 1 |
Number of clamping points per level: | 3 |
Number of potentials per tier: | 1 |
Levels cross-connected internally: | No |
PE connection: | No |
Rail: | TS 35 |
Explosion-tested version: | Yes |
Number of similar terminals: | 1 |
Open sides: | right |
Type of mounting: | Snap-on |
Certificate No. (CSA): | 200039-1194786 |
Current size C (CSA): | 23 A |
Voltage size C (CSA): | 600 V |
Wire cross section max. (CSA): | 14 AWG |
Wire cross section min. (CSA): | 26 AWG |
Blade size: | 0.6 x 3.5 mm |
Clamping range, max.: | 2.5 mm² |
Clamping range, min.: | 0.13 mm² |
Connection direction: | Inclined / angled |
Gauge to IEC 60947-1: | A2 |
Number of connections: | 3 |
Stripping length: | 10 mm |
Type of connection: | Tension-clamp connection |
Wire connection cross section AWG, max.: | AWG 12 |
Wire connection cross section AWG, min.: | AWG 26 |
Wire connection cross section, finely stranded, max.: | 2.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 1.5 mm² |
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 0.5 mm² |
Wire connection cross-section, finely stranded, min.: | 0.5 mm² |
Wire connection cross-section, solid core, max.: | 2.5 mm² |
Wire connection cross-section, solid core, min.: | 0.5 mm² |
Rated cross-section: | 2.5 mm² |
Rated voltage: | 800 V |
Rated current: | 24 A |
Current at maximum wires: | 24 A |
Standards: | IEC 60947-7-1 |
Volume resistance according to IEC 60947-7-x: | 1.33 mΩ |
Power loss in accordance with IEC 60947-7-x: | 0.77 W |
Rated impulse withstand voltage: | 8 kV |
Pollution severity: | 3 |
Certificate No. (UR): | E60693 |
Conductor size Factory wiring max. (UR): | 12 AWG |
Conductor size Factory wiring min. (UR): | 26 AWG |
Conductor size Field wiring max. (UR): | 12 AWG |
Conductor size Field wiring min. (UR): | 26 AWG |
Current size C (UR): | 20 A |
Voltage size C (UR): | 600 V |
ETIM 6.0: | EC000897 |
ETIM 7.0: | EC000897 |
eClass 9.0: | 27-14-11-20 |
eClass 9.1: | 27-14-11-20 |
eClass 10.0: | 27-14-11-20 |
UNSPSC: | 30-21-18-11 |
ROHS: | Conform |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,007 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |