View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1504360000
IE-SW-BL05-1GS-4GTPOE
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1504360000
IE-SW-BL05-1GS-4GTPOE
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | IE-SW-BL05-1GS-4GTPOE |
| Order No.: | 1504360000 |
| Version: | Network switch, unmanaged PoE, Gigabit Ethernet, Number of ports: 4 * RJ45 10/100/1000BaseT(X) PoE+, 1* Slot 100/1000BaseSFP, IP30, 0 °C...60 °C |
| GTIN (EAN): | 4050118312409 |
| Qty.: | 1 pc(s). |
| Width: | 29 |
| Width (inches): | 1.142 inch |
| Height: | 135 mm |
| Height (inches): | 5.315 inch |
| Depth: | 105 mm |
| Depth (inches): | 4.134 inch |
| Net weight: | 360 g |
| REACH SVHC: | Lead 7439-92-1 |
| EMC standards: | FCC Part 15 Subpart B Class A, EN 55032, EN 55024, IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, EN 61000-4-8 |
| Safety standard: | UL 508 |
| Shock: | according to IEC 60068-2-27 |
| Vibration: | according to IEC 60068-2-6 |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| DIP switch: | Broadcast storm protection enable/disable, Enable/disable jumbo frame support, Activate/deactivate IEEE 802.3az energy-efficient Ethernet, Switching between standard PoE (up to 30 W) and High Power PoE (up to 36 W), Switching between 100BaseSFP and 1000BaseSFP on SFP port |
| LED indicator: | PWR1, PWR2, 10/100/1000M (TP-Port), 100/1000M (SFP-Port), PoE |
| Note 1: | When connecting a single-mode fiber transceiver over a short distance, we recommend using an attenuator to prevent the transceiver from being damaged by excessive optical power. |
| Note 2: | The SFP slot can only be used with Weidmüller SFP transceivers. Third-party SFP transceivers are not accepted by the switch. |
| Number of ports: | 4 * RJ45 10/100/1000BaseT(X) PoE+, 1* Slot 100/1000BaseSFP |
| RJ45 ports: | 10/100/1000BaseT(X), auto negotiation, Full-/half-duplex mode, Auto MDI/MDI-X port |
| MTBF: | 1,257,910 hrs |
| Database: | Telcordia (Bellcore), GB |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 17 V |
| Power budget: | 62 W |
| Voltage type: | DC |
| Voltage, min.: | 18 V |
| Voltage, max.: | 35 V |
| Power budget: | 120 W |
| Voltage type: | DC |
| Voltage, min.: | 36 V |
| Voltage, max.: | 57 V |
| Power budget: | 144 W |
| Standard: | IEEE 802.3af |
| Output power: | 15.4 W |
| Standard: | IEEE 802.3at |
| Output power: | 30 W |
| Standard: | High power mode (proprietary) |
| Output power: | 36 W |
| Standard: | IEEE 802.3af |
| Output current: | 350 mA |
| Standard: | IEEE 802.3at |
| Output current: | 600 mA |
| Standard: | High power mode (proprietary) |
| Output current: | 720 mA |
| PoE pin assignment: | Mode A: Pin 1, 2 (V+); Pin 3, 6 (V-); Alternative A; MDI |
| Connection type: | 2 removable 2-pole terminal blocks |
| Voltage: | 12 V DC |
| Current: | 5.92 A |
| Voltage: | 24 V DC |
| Current: | 5.65 A |
| Voltage: | 48 V DC |
| Current: | 3.21 A |
| Inrush current: | 17.4 A at 24 V DC (0.1 to 1 ms) |
| Overload current protection: | Yes |
| Power consumption: | max. 11.73 W (without PD´s consumption) |
| Power loss: | 36.4 BTU/h |
| Reverse polarity protection: | Yes |
| Voltage supply: | 12/24/48 V DC, 2 redundant inputs |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 57 V |
| Jumbo frame support: | up to 10 KB |
| MAC table size: | 8 K |
| Packet buffer size: | 1,024 Kbit |
| Housing main material: | Aluminium |
| Protection degree: | IP30 |
| Type of mounting: | DIN rail, Panel (with optional mounting kit) |
| Data switching: | Store and Forward |
| Flow control: | IEEE 802.3x flow control, Back pressure flow control |
| Standard: | IEEE 802.3af for Power-over-Ethernet, IEEE 802.3at for Power-over-Ethernet, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3x for flow control, IEEE 802.3az Energy-Efficient Ethernet |
| ETIM 6.0: | EC000734 |
| ETIM 7.0: | EC000734 |
| eClass 9.0: | 19-17-01-06 |
| eClass 9.1: | 19-17-01-06 |
| eClass 10.0: | 19-17-04-02 |
| ROHS: | Conform |
| Type: | IE-SW-BL05-1GS-4GTPOE |
| Order No.: | 1504360000 |
| Version: | Network switch, unmanaged PoE, Gigabit Ethernet, Number of ports: 4 * RJ45 10/100/1000BaseT(X) PoE+, 1* Slot 100/1000BaseSFP, IP30, 0 °C...60 °C |
| GTIN (EAN): | 4050118312409 |
| Qty.: | 1 pc(s). |
| Width: | 29 |
| Width (inches): | 1.142 inch |
| Height: | 135 mm |
| Height (inches): | 5.315 inch |
| Depth: | 105 mm |
| Depth (inches): | 4.134 inch |
| Net weight: | 360 g |
| REACH SVHC: | Lead 7439-92-1 |
| EMC standards: | FCC Part 15 Subpart B Class A, EN 55032, EN 55024, IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, EN 61000-4-8 |
| Safety standard: | UL 508 |
| Shock: | according to IEC 60068-2-27 |
| Vibration: | according to IEC 60068-2-6 |
| Humidity: | 5...95 %, no condensation |
| Operating temperature, max.: | 60 °C |
| Operating temperature, min.: | 0 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| DIP switch: | Broadcast storm protection enable/disable, Enable/disable jumbo frame support, Activate/deactivate IEEE 802.3az energy-efficient Ethernet, Switching between standard PoE (up to 30 W) and High Power PoE (up to 36 W), Switching between 100BaseSFP and 1000BaseSFP on SFP port |
| LED indicator: | PWR1, PWR2, 10/100/1000M (TP-Port), 100/1000M (SFP-Port), PoE |
| Note 1: | When connecting a single-mode fiber transceiver over a short distance, we recommend using an attenuator to prevent the transceiver from being damaged by excessive optical power. |
| Note 2: | The SFP slot can only be used with Weidmüller SFP transceivers. Third-party SFP transceivers are not accepted by the switch. |
| Number of ports: | 4 * RJ45 10/100/1000BaseT(X) PoE+, 1* Slot 100/1000BaseSFP |
| RJ45 ports: | 10/100/1000BaseT(X), auto negotiation, Full-/half-duplex mode, Auto MDI/MDI-X port |
| MTBF: | 1,257,910 hrs |
| Database: | Telcordia (Bellcore), GB |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 17 V |
| Power budget: | 62 W |
| Voltage type: | DC |
| Voltage, min.: | 18 V |
| Voltage, max.: | 35 V |
| Power budget: | 120 W |
| Voltage type: | DC |
| Voltage, min.: | 36 V |
| Voltage, max.: | 57 V |
| Power budget: | 144 W |
| Standard: | IEEE 802.3af |
| Output power: | 15.4 W |
| Standard: | IEEE 802.3at |
| Output power: | 30 W |
| Standard: | High power mode (proprietary) |
| Output power: | 36 W |
| Standard: | IEEE 802.3af |
| Output current: | 350 mA |
| Standard: | IEEE 802.3at |
| Output current: | 600 mA |
| Standard: | High power mode (proprietary) |
| Output current: | 720 mA |
| PoE pin assignment: | Mode A: Pin 1, 2 (V+); Pin 3, 6 (V-); Alternative A; MDI |
| Connection type: | 2 removable 2-pole terminal blocks |
| Voltage: | 12 V DC |
| Current: | 5.92 A |
| Voltage: | 24 V DC |
| Current: | 5.65 A |
| Voltage: | 48 V DC |
| Current: | 3.21 A |
| Inrush current: | 17.4 A at 24 V DC (0.1 to 1 ms) |
| Overload current protection: | Yes |
| Power consumption: | max. 11.73 W (without PD´s consumption) |
| Power loss: | 36.4 BTU/h |
| Reverse polarity protection: | Yes |
| Voltage supply: | 12/24/48 V DC, 2 redundant inputs |
| Voltage type: | DC |
| Voltage, min.: | 12 V |
| Voltage, max.: | 57 V |
| Jumbo frame support: | up to 10 KB |
| MAC table size: | 8 K |
| Packet buffer size: | 1,024 Kbit |
| Housing main material: | Aluminium |
| Protection degree: | IP30 |
| Type of mounting: | DIN rail, Panel (with optional mounting kit) |
| Data switching: | Store and Forward |
| Flow control: | IEEE 802.3x flow control, Back pressure flow control |
| Standard: | IEEE 802.3af for Power-over-Ethernet, IEEE 802.3at for Power-over-Ethernet, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseX, IEEE 802.3x for flow control, IEEE 802.3az Energy-Efficient Ethernet |
| ETIM 6.0: | EC000734 |
| ETIM 7.0: | EC000734 |
| eClass 9.0: | 19-17-01-06 |
| eClass 9.1: | 19-17-01-06 |
| eClass 10.0: | 19-17-04-02 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,491 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |