View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1477890000
KSPMH M32 SSC
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1477890000
KSPMH M32 SSC
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | KSPMH M32 SSC |
| Order No.: | 1477890000 |
| Version: | KSPMH (Klippon blanking plug, type MH), Blanking plug, M 32, 16 mm, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118285901 |
| Qty.: | 10 pc(s). |
| Length: | 21 mm |
| Length (inches): | 0.827 inch |
| Net weight: | 142.9 g |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX1320X |
| Certificate no. cable gland (EAC): | TR RU C-GB.ΓБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0131X |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 32 |
| Length of thread: | 16 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66, IP68 (100 m / 168 h) |
| Water depth: | 100 m |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 37.5 mm |
| O-Ring: | Silicone |
| Tightening torque: | 10 Nm |
| Standards: | EN 60079-31, EN 60079-0, EN 60079-1, EN 60079-7 |
| Note: protection class: | • All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit. |
| ETIM 6.0: | EC000451 |
| ETIM 7.0: | EC000451 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-35 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
| Type: | KSPMH M32 SSC |
| Order No.: | 1477890000 |
| Version: | KSPMH (Klippon blanking plug, type MH), Blanking plug, M 32, 16 mm, Stainless steel 1.4404 (316L) |
| GTIN (EAN): | 4050118285901 |
| Qty.: | 10 pc(s). |
| Length: | 21 mm |
| Length (inches): | 0.827 inch |
| Net weight: | 142.9 g |
| Certificate no. cable gland (ATEX): | SIRA 09ATEX1320X |
| Certificate no. cable gland (EAC): | TR RU C-GB.ΓБ06.B.00098 |
| Certificate no. cable gland (IECEx): | IECEx SIR 09.0131X |
| Material: | Stainless steel 1.4404 (316L) |
| External thread: | M 32 |
| Length of thread: | 16 mm |
| Impact resistance: | 7 J ATEX version |
| Protection degree: | IP66, IP68 (100 m / 168 h) |
| Water depth: | 100 m |
| Operating temperature range, min.: | -60 °C |
| Operating temperature range, max.: | 200 °C |
| Head diameter: | 37.5 mm |
| O-Ring: | Silicone |
| Tightening torque: | 10 Nm |
| Standards: | EN 60079-31, EN 60079-0, EN 60079-1, EN 60079-7 |
| Note: protection class: | • All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit. |
| ETIM 6.0: | EC000451 |
| ETIM 7.0: | EC000451 |
| eClass 9.0: | 27-14-44-25 |
| eClass 9.1: | 27-14-44-35 |
| eClass 10.0: | 27-14-44-25 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,143 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |