View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1435610000
ACT20M-RTI-CO-EOLP-S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1435610000
ACT20M-RTI-CO-EOLP-S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | ACT20M-RTI-CO-EOLP-S |
| Order No.: | 1435610000 |
| Version: | Temperature converter, 2-/3-/4- wire RTD, Input : Temperature, Output : 4-20 mA, (loop powered) |
| GTIN (EAN): | 4050118240528 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 80 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 227 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Influence of the sensor cable resistance: | < 0.002 Ω⁄Ω |
| Input measurement range: | PT100 -200…+850 °C |
| Line resistance in measuring circuit: | 50 Ω@ RTD (Pt100), 10 kΩ @ TC (J, K) |
| Temperature input range: | Configurable, min. measurement range 10°C (RTD) |
| Number of outputs: | 1 |
| Output current: | configurable, 4...20 mA, 20…4 mA |
| Wire break detection: | 3.5 mA ⁄ 23 mA ⁄ none |
| Accuracy: | absolute accuracy: < ±0.1 % of the measurement range, Basic accuracy: < ±0.2°C |
| Cold-junction compensation error: | ±(2.0 °C + 0.4 °C x Δt) Δt = inside temperature – ambient temperature |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA (loop) |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | Without isolation |
| Power consumption, max.: | 0.8 W |
| Power consumption, typ.: | 0.48 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms, < 300 ms |
| Temperature coefficient: | RTD (PT100) ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C |
| Voltage supply: | Output loop powered, 6…35 V |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | Without isolation |
| Pollution severity: | 2 |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| Type: | ACT20M-RTI-CO-EOLP-S |
| Order No.: | 1435610000 |
| Version: | Temperature converter, 2-/3-/4- wire RTD, Input : Temperature, Output : 4-20 mA, (loop powered) |
| GTIN (EAN): | 4050118240528 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 80 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 227 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | PT100 / 2-/3-/4-wire |
| Influence of the sensor cable resistance: | < 0.002 Ω⁄Ω |
| Input measurement range: | PT100 -200…+850 °C |
| Line resistance in measuring circuit: | 50 Ω@ RTD (Pt100), 10 kΩ @ TC (J, K) |
| Temperature input range: | Configurable, min. measurement range 10°C (RTD) |
| Number of outputs: | 1 |
| Output current: | configurable, 4...20 mA, 20…4 mA |
| Wire break detection: | 3.5 mA ⁄ 23 mA ⁄ none |
| Accuracy: | absolute accuracy: < ±0.1 % of the measurement range, Basic accuracy: < ±0.2°C |
| Cold-junction compensation error: | ±(2.0 °C + 0.4 °C x Δt) Δt = inside temperature – ambient temperature |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA (loop) |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | Without isolation |
| Power consumption, max.: | 0.8 W |
| Power consumption, typ.: | 0.48 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms, < 300 ms |
| Temperature coefficient: | RTD (PT100) ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C |
| Voltage supply: | Output loop powered, 6…35 V |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | Without isolation |
| Pollution severity: | 2 |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,089 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |