View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1375480000
ACT20M-TCI-AO-S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1375480000
ACT20M-TCI-AO-S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | ACT20M-TCI-AO-S |
| Order No.: | 1375480000 |
| Version: | Temperature converter, Thermocouple, Input : Temperature, Output : I / U |
| GTIN (EAN): | 4050118259650 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 84 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 147 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Thermocouple (type J, K) |
| Input measurement range: | Thermocouple type J -100…+1200°C, Thermocouple type K -200…+1370°C |
| Temperature input range: | Configurable, min. measurement range 50°C (TC) |
| Number of outputs: | 1 |
| Output voltage, note: | configurable, 0(2)...10 V, 0(1)...5 V |
| Output current: | configurable, 0...20 mA, 4...20 mA |
| Wire break detection: | Configurable, 3.5 mA ⁄ 23 mA ⁄ none |
| cold junction compensation: | configurable internal or external cold-junction compensation (thermocouple) |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | absolute accuracy: < ±0.05 % of the measurement range, Basic accuracy: < ±0.5° |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | 3-way isolator |
| Power consumption, max.: | 0.7 W |
| Power consumption, typ.: | 0.49 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms, < 300 ms, Configurable |
| Temperature coefficient: | 0,1 °C ⁄ °C, or, ≤0,01% des Messbereichs⁄°C |
| Voltage supply: | 24 V DC ± 30 % |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The ACT20M-TCI-AO-S configurable temperature transducer isolates and converts analogue signals. An analogue thermocouple input signal (Type J, K) is linearly converted into an analogue output signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) and this is done with direct wiring or over the Weidmüller rail bus. |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
| Type: | ACT20M-TCI-AO-S |
| Order No.: | 1375480000 |
| Version: | Temperature converter, Thermocouple, Input : Temperature, Output : I / U |
| GTIN (EAN): | 4050118259650 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 84 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| MTBF: | 147 Years |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 1 |
| Sensor: | Thermocouple (type J, K) |
| Input measurement range: | Thermocouple type J -100…+1200°C, Thermocouple type K -200…+1370°C |
| Temperature input range: | Configurable, min. measurement range 50°C (TC) |
| Number of outputs: | 1 |
| Output voltage, note: | configurable, 0(2)...10 V, 0(1)...5 V |
| Output current: | configurable, 0...20 mA, 4...20 mA |
| Wire break detection: | Configurable, 3.5 mA ⁄ 23 mA ⁄ none |
| cold junction compensation: | configurable internal or external cold-junction compensation (thermocouple) |
| load impedance voltage: | ≥ 10 kΩ |
| Load impedance current: | ≤ 600 Ω |
| Accuracy: | absolute accuracy: < ±0.05 % of the measurement range, Basic accuracy: < ±0.5° |
| Configuration: | DIP switch |
| Setting parameters: | Output |
| Configuration: | 4...20 mA |
| Setting parameters: | Sensor error detection |
| Configuration: | enabled |
| Setting parameters: | Output error level |
| Configuration: | downscale |
| Setting parameters: | Noise suppression |
| Configuration: | 50 Hz |
| Setting parameters: | Step response time |
| Configuration: | < 30 ms |
| Setting parameters: | Start temperature |
| Configuration: | -200 °C |
| Setting parameters: | End temperature |
| Configuration: | 0 °C |
| Galvanic isolation: | 3-way isolator |
| Power consumption, max.: | 0.7 W |
| Power consumption, typ.: | 0.49 W |
| Rail: | TS 35 |
| Step response time: | ≤ 30 ms, < 300 ms, Configurable |
| Temperature coefficient: | 0,1 °C ⁄ °C, or, ≤0,01% des Messbereichs⁄°C |
| Voltage supply: | 24 V DC ± 30 % |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 3-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| Product information: | The ACT20M-TCI-AO-S configurable temperature transducer isolates and converts analogue signals. An analogue thermocouple input signal (Type J, K) is linearly converted into an analogue output signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) and this is done with direct wiring or over the Weidmüller rail bus. |
| ETIM 6.0: | EC002919 |
| ETIM 7.0: | EC002919 |
| eClass 9.0: | 27-21-01-29 |
| eClass 9.1: | 27-21-01-29 |
| eClass 10.0: | 27-21-01-29 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,09 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |