1375440000
VPU II 0 PV Y 1000V DC
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2022-12-31 |
| Type: | VPU II 0 PV Y 1000V DC |
| Order No.: | 1375440000 |
| Version: | Surge voltage arrester, Low voltage, 1000 V |
| GTIN (EAN): | 4050118192230 |
| Qty.: | 1 pc(s). |
| Width: | 17.8 mm |
| Width (inches): | 0.701 inch |
| Height: | 90 mm |
| Height (inches): | 3.543 inch |
| Depth: | 64 mm |
| Depth (inches): | 2.52 inch |
| Net weight: | 90 g |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C... |
| Storage temperature: | -40 °C...80 °C |
| Colour: | orange |
| Design: | Installation housing; 1TE, Insta IP 20 |
| Optical function display: | green = OK; red = arrester is defective - replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| UL 94 flammability rating: | V-0 |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Conditions and requirements: | EN 50539-11 |
| Maximum continuous operating voltage UCPV mode +/-, -/PE, +/PE: | 1,000 V DC |
| PV system voltage, max. Ucpv: | 1,000 V |
| Protection level Up at In (per module): | ≤ 4.0 kV |
| Protection level Up mode (+/- , -/PE , +/PE): | ≤ 4.0 kV |
| Short-circuit curent ISCPV: | 200 A |
| Standards: | EN 50539-11 |
| Type of connection: | pluggable |
| Long specification: | Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 1000 VDC Y series. The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 1000 VDC for PV systems Y series Type: Weidmüller VPU II 0 PV Y 1000 VDC Order No.: 13515440000 |
| Short specification: | Spare arrester for surge voltage arrester VPU II 1000 V DC Y series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 1000 V DC for PV systems Y-series Type: Weidmüller VPU II 0 PV Y 1000 V DC Order no.: 13515440000 |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
| Delivery status: | This article will no longer be available in the future. |
| Available until: | 2022-12-31 |
| Type: | VPU II 0 PV Y 1000V DC |
| Order No.: | 1375440000 |
| Version: | Surge voltage arrester, Low voltage, 1000 V |
| GTIN (EAN): | 4050118192230 |
| Qty.: | 1 pc(s). |
| Width: | 17.8 mm |
| Width (inches): | 0.701 inch |
| Height: | 90 mm |
| Height (inches): | 3.543 inch |
| Depth: | 64 mm |
| Depth (inches): | 2.52 inch |
| Net weight: | 90 g |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C... |
| Storage temperature: | -40 °C...80 °C |
| Colour: | orange |
| Design: | Installation housing; 1TE, Insta IP 20 |
| Optical function display: | green = OK; red = arrester is defective - replace |
| Protection degree: | IP20 |
| Rail: | TS 35 |
| UL 94 flammability rating: | V-0 |
| Pollution severity: | 2 |
| Surge voltage category: | III |
| Conditions and requirements: | EN 50539-11 |
| Maximum continuous operating voltage UCPV mode +/-, -/PE, +/PE: | 1,000 V DC |
| PV system voltage, max. Ucpv: | 1,000 V |
| Protection level Up at In (per module): | ≤ 4.0 kV |
| Protection level Up mode (+/- , -/PE , +/PE): | ≤ 4.0 kV |
| Short-circuit curent ISCPV: | 200 A |
| Standards: | EN 50539-11 |
| Type of connection: | pluggable |
| Long specification: | Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 1000 VDC Y series. The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 1000 VDC for PV systems Y series Type: Weidmüller VPU II 0 PV Y 1000 VDC Order No.: 13515440000 |
| Short specification: | Spare arrester for surge voltage arrester VPU II 1000 V DC Y series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 1000 V DC for PV systems Y-series Type: Weidmüller VPU II 0 PV Y 1000 V DC Order no.: 13515440000 |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,09 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |