View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1351700000
VPU III SO LD+A
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1351700000
VPU III SO LD+A
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | VPU III SO LD+A |
| Order No.: | 1351700000 |
| GTIN (EAN): | 4050118158458 |
| Qty.: | 1 pc(s). |
| Width: | 12 mm |
| Width (inches): | 0.472 inch |
| Height: | 35 mm |
| Height (inches): | 1.378 inch |
| Depth: | 25 mm |
| Depth (inches): | 0.984 inch |
| Net weight: | 34 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...55 °C |
| Storage temperature: | -40 °C...80 °C |
| Connection type: | Miscellaneous |
| Cross-section for connected wire, solid core, max.: | 1.5 mm² |
| Acoustic signal: | Yes |
| Colour: | black |
| Design: | Flush mounting |
| Optical function display: | Green LED = OK, Red LED = arrester is defective, replace |
| Protection degree: | IP20 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | without telecomm. contact |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Rated voltage (AC): | 230 V |
| Voltage type: | AC |
| Max. continuous voltage, Uc (AC): | 275 V |
| Low voltage network: | Single-phase |
| Fuse: | 16 A |
| Short-circuit current rating ISCCR: | 1.5 kA |
| Protection level UP (typ.): | ≤ 0.9 kV |
| Protection level Up at IN (L/N-PE): | ≤ 1.5 kV |
| Leakage current at Un: | 30 µA |
| Temporary surge voltage (over-voltage) - TOV: | 440 V |
| Acoustic signal: | Yes |
| Combined pulse UOC: | 3 kV |
| Mains frequency at 250 Vmax: | 50...60Hz |
| Number of poles: | 1 |
| PE conductor current IPE: | 10 µA |
| Requirements category acc. to IEC 61643-11: | Type III |
| Requirements class, acc. to EN 61643-11: | T3 |
| Response time: | < 100μs |
| Signalling contact: | No |
| Wire connection cross section, finely stranded, max.: | 1 mm² |
| Long specification: | Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III SO LD +A is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the red LED goes out and an acoustic signal sounds. Rated voltage: 230 VAC In/max (8/20 µs): 1.5 kA protection level < 1.5 kV Type: Weidmüller VPU III R SO LD A Order No. 1351700000 or equivalent |
| Short specification: | Class III arrester with Uoc: 3 kV suitable for 230 V AC mains systems. Protection level < 1.5 kV. With red LED display and acoustic alert Type: Weidmüller VPU III SO LD A Order no. 1351700000 or equivalent |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
| Type: | VPU III SO LD+A |
| Order No.: | 1351700000 |
| GTIN (EAN): | 4050118158458 |
| Qty.: | 1 pc(s). |
| Width: | 12 mm |
| Width (inches): | 0.472 inch |
| Height: | 35 mm |
| Height (inches): | 1.378 inch |
| Depth: | 25 mm |
| Depth (inches): | 0.984 inch |
| Net weight: | 34 g |
| Humidity: | 5 - 95% rel. humidity |
| Operating temperature, max.: | 55 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 80 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...55 °C |
| Storage temperature: | -40 °C...80 °C |
| Connection type: | Miscellaneous |
| Cross-section for connected wire, solid core, max.: | 1.5 mm² |
| Acoustic signal: | Yes |
| Colour: | black |
| Design: | Flush mounting |
| Optical function display: | Green LED = OK, Red LED = arrester is defective, replace |
| Protection degree: | IP20 |
| Segment: | Power distribution |
| UL 94 flammability rating: | V-0 |
| Version: | without telecomm. contact |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Rated voltage (AC): | 230 V |
| Voltage type: | AC |
| Max. continuous voltage, Uc (AC): | 275 V |
| Low voltage network: | Single-phase |
| Fuse: | 16 A |
| Short-circuit current rating ISCCR: | 1.5 kA |
| Protection level UP (typ.): | ≤ 0.9 kV |
| Protection level Up at IN (L/N-PE): | ≤ 1.5 kV |
| Leakage current at Un: | 30 µA |
| Temporary surge voltage (over-voltage) - TOV: | 440 V |
| Acoustic signal: | Yes |
| Combined pulse UOC: | 3 kV |
| Mains frequency at 250 Vmax: | 50...60Hz |
| Number of poles: | 1 |
| PE conductor current IPE: | 10 µA |
| Requirements category acc. to IEC 61643-11: | Type III |
| Requirements class, acc. to EN 61643-11: | T3 |
| Response time: | < 100μs |
| Signalling contact: | No |
| Wire connection cross section, finely stranded, max.: | 1 mm² |
| Long specification: | Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III SO LD +A is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the red LED goes out and an acoustic signal sounds. Rated voltage: 230 VAC In/max (8/20 µs): 1.5 kA protection level < 1.5 kV Type: Weidmüller VPU III R SO LD A Order No. 1351700000 or equivalent |
| Short specification: | Class III arrester with Uoc: 3 kV suitable for 230 V AC mains systems. Protection level < 1.5 kV. With red LED display and acoustic alert Type: Weidmüller VPU III SO LD A Order no. 1351700000 or equivalent |
| ETIM 6.0: | EC000941 |
| ETIM 7.0: | EC000941 |
| eClass 9.0: | 27-13-08-05 |
| eClass 9.1: | 27-13-08-05 |
| eClass 10.0: | 27-13-08-05 |
| UNSPSC: | 30-21-19-21 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,036 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |