View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1319270000
SCS 24VDC P2SIL3DSES
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1319270000
SCS 24VDC P2SIL3DSES
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | SCS 24VDC P2SIL3DSES |
| Order No.: | 1319270000 |
| Version: | SAFESERIES, Safety relay,24 V DC -15 / +20%, 35 mA , Max. switching current, internal fuse : 5 A (refer to derating curve), SIL 3, DIN EN 61508 |
| GTIN (EAN): | 4050118125115 |
| Qty.: | 1 pc(s). |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 117.3 mm |
| Height (inches): | 4.618 inch |
| Depth: | 114.1 mm |
| Depth (inches): | 4.492 inch |
| Net weight: | 200 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...50 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC -15 / +20% |
| Current consumption: | 45 mA |
| Guaranteed current consumption of 24 VDC -10%: | 35 mA |
| Inrush current: | ≤ 80 mA / 40 ms |
| Pull-in/drop-out voltage DC coil: | 17 V / 12.5 V (DTS) |
| Status indicator: | LED yellow |
| Protective circuit: | Rectifier |
| Rated control voltage: | 24 V DC |
| Number of test inputs: | 2 |
| Status indicator: | LED red flashing: test input is triggered |
| Contact base material: | AgNi 0.15 gold flashed |
| Contact design: | 1 x de-energised to safe (NO contact), 1 x energised to safe (NO contact) |
| Max. permitted switching voltage: | 250 V AC |
| Max. permitted switching current: | 8 A |
| Max. switching current, internal fuse: | 5 A (refer to derating curve) |
| Max. switching current, external fuse: | 5 A (refer to derating curve) |
| Max. switching capacity: | 2000 VA |
| Internal fuse: | 5 A time-lag |
| External back-up fuse: | 5 A time lag |
| Short circuit resistance: | No |
| Switch-on time: | < 5.5 ms (DTS), < 5 ms (ETS) |
| Switch-off time: | < 4 ms (DTS), < 4 ms (ETS) |
| Min. switching capacity: | 10 mA @ 12 V |
| Device type: | A |
| Hardware fault tolerance (HFT): | 1 |
| Safety category: | SIL 3 |
| Safety standard: | DIN EN 61508 |
| Rail: | TS 35 |
| Colour: | black, yellow |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Creepage and clearance distance output – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 50178, EN 61000, EN 61326-3-2 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.13 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Blade size: | size PH0 |
| ETIM 6.0: | EC001449 |
| ETIM 7.0: | EC001449 |
| eClass 9.0: | 27-37-18-19 |
| eClass 9.1: | 27-37-18-19 |
| eClass 10.0: | 27-37-18-19 |
| ROHS: | Conform |
| Type: | SCS 24VDC P2SIL3DSES |
| Order No.: | 1319270000 |
| Version: | SAFESERIES, Safety relay,24 V DC -15 / +20%, 35 mA , Max. switching current, internal fuse : 5 A (refer to derating curve), SIL 3, DIN EN 61508 |
| GTIN (EAN): | 4050118125115 |
| Qty.: | 1 pc(s). |
| Width: | 22.5 mm |
| Width (inches): | 0.886 inch |
| Height: | 117.3 mm |
| Height (inches): | 4.618 inch |
| Depth: | 114.1 mm |
| Depth (inches): | 4.492 inch |
| Net weight: | 200 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 50 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...50 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 24 V DC -15 / +20% |
| Current consumption: | 45 mA |
| Guaranteed current consumption of 24 VDC -10%: | 35 mA |
| Inrush current: | ≤ 80 mA / 40 ms |
| Pull-in/drop-out voltage DC coil: | 17 V / 12.5 V (DTS) |
| Status indicator: | LED yellow |
| Protective circuit: | Rectifier |
| Rated control voltage: | 24 V DC |
| Number of test inputs: | 2 |
| Status indicator: | LED red flashing: test input is triggered |
| Contact base material: | AgNi 0.15 gold flashed |
| Contact design: | 1 x de-energised to safe (NO contact), 1 x energised to safe (NO contact) |
| Max. permitted switching voltage: | 250 V AC |
| Max. permitted switching current: | 8 A |
| Max. switching current, internal fuse: | 5 A (refer to derating curve) |
| Max. switching current, external fuse: | 5 A (refer to derating curve) |
| Max. switching capacity: | 2000 VA |
| Internal fuse: | 5 A time-lag |
| External back-up fuse: | 5 A time lag |
| Short circuit resistance: | No |
| Switch-on time: | < 5.5 ms (DTS), < 5 ms (ETS) |
| Switch-off time: | < 4 ms (DTS), < 4 ms (ETS) |
| Min. switching capacity: | 10 mA @ 12 V |
| Device type: | A |
| Hardware fault tolerance (HFT): | 1 |
| Safety category: | SIL 3 |
| Safety standard: | DIN EN 61508 |
| Rail: | TS 35 |
| Colour: | black, yellow |
| Rated voltage: | 300 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 5.5 mm |
| Creepage and clearance distance output – output: | ≥ 5.5 mm |
| Impulse withstand voltage: | 6 kV (1.2/50 µs) |
| Standards: | EN 50178, EN 61000, EN 61326-3-2 |
| Wire connection method: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 1.5 mm² |
| Clamping range, min.: | 0.13 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 26 |
| Wire connection cross section AWG, max.: | AWG 12 |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Blade size: | size PH0 |
| ETIM 6.0: | EC001449 |
| ETIM 7.0: | EC001449 |
| eClass 9.0: | 27-37-18-19 |
| eClass 9.1: | 27-37-18-19 |
| eClass 10.0: | 27-37-18-19 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,213 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |