View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
1176050000
ACT20M-2CI-2CO-OLP-S
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 1176050000
ACT20M-2CI-2CO-OLP-S
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | ACT20M-2CI-2CO-OLP-S |
| Order No.: | 1176050000 |
| Version: | Signal converter/insulator, Output current loop powered, 2-channel, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4032248969999 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 96 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 2 |
| Sensor: | 2-wire transmitter (without own power supply) |
| Sensor supply: | 6…35 V (@ 20 mA) |
| Input current: | 4...20 mA |
| Voltage drop, current input: | Typical 2.5 V |
| Number of outputs: | 2 |
| Output current: | 4...20 mA |
| Cut-off frequency (-3 dB): | 100 Hz |
| Load impedance current: | ≤600 Ω (channel 1 + 2), @ max 23mA |
| Supply voltage (output): | 6…35 V |
| Accuracy: | < 0.05 % of measuring range |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Power consumption, max.: | 50 mW per channel |
| Rail: | TS 35 |
| Step response time: | ≤ 5 ms |
| Voltage supply: | Output loop powered |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 2-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-20 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
| Type: | ACT20M-2CI-2CO-OLP-S |
| Order No.: | 1176050000 |
| Version: | Signal converter/insulator, Output current loop powered, 2-channel, Input : 4-20 mA, Output : 4-20 mA |
| GTIN (EAN): | 4032248969999 |
| Qty.: | 1 pc(s). |
| Width: | 6.1 |
| Width (inches): | 0.24 inch |
| Height: | 112.5 mm |
| Height (inches): | 4.429 inch |
| Depth: | 114.3 mm |
| Depth (inches): | 4.5 inch |
| Net weight: | 96 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -25 °C |
| Storage temperature, max.: | 85 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -25 °C...70 °C |
| Ambient temperature: | -25 °C...+70 °C |
| Storage temperature: | -40 °C...85 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Number of inputs: | 2 |
| Sensor: | 2-wire transmitter (without own power supply) |
| Sensor supply: | 6…35 V (@ 20 mA) |
| Input current: | 4...20 mA |
| Voltage drop, current input: | Typical 2.5 V |
| Number of outputs: | 2 |
| Output current: | 4...20 mA |
| Cut-off frequency (-3 dB): | 100 Hz |
| Load impedance current: | ≤600 Ω (channel 1 + 2), @ max 23mA |
| Supply voltage (output): | 6…35 V |
| Accuracy: | < 0.05 % of measuring range |
| Configuration: | none |
| Galvanic isolation: | 2-way isolator |
| Power consumption, max.: | 50 mW per channel |
| Rail: | TS 35 |
| Step response time: | ≤ 5 ms |
| Voltage supply: | Output loop powered |
| EMC standards: | IEC 61326-1, NE 21 |
| Galvanic isolation: | 2-way isolator |
| Pollution severity: | 2 |
| Surge voltage category: | II |
| Marking: | II 3 G Ex nA IIC T4 Gc |
| Type of connection: | Screw connection |
| Tightening torque, min.: | 0.4 Nm |
| Tightening torque, max.: | 0.6 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 0.5 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire connection cross section AWG, min.: | AWG 30 |
| Wire connection cross section AWG, max.: | AWG 14 |
| ETIM 6.0: | EC002653 |
| ETIM 7.0: | EC002653 |
| eClass 9.0: | 27-21-01-20 |
| eClass 9.1: | 27-21-01-20 |
| eClass 10.0: | 27-21-01-20 |
| ROHS: | Conform |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,098 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |