910573
NCN100-F23-US-V93
Inductive sensor
Series: Rectangular type, Housing material: ABS (TSG), bottom Al, Output type: 2-wire, Installation: non-flush, Connection type: Connector plug 7/8 inch-16 UN , 3-pin, Degree of protection: IP67fa
| Switching function: | Normally open (NO) |
| Output type: | Two-wire |
| Rated operating distance: | 100 mm |
| Installation: | non-flush |
| Output polarity: | AC/DC |
| Assured operating distance: | 0 ... 81 mm |
| Actual operating distance: | 90 ... 110 mm typ. |
| Reduction factor rAl: | 0.37 |
| Reduction factor rCu: | 0.35 |
| Reduction factor r304: | 0.7 |
| Reduction factor rBrass: | 0.47 |
| Output type: | 2-wire |
| Switching frequency: | 10 Hz |
| Hysteresis: | 3 ... 15 % 5 % typical |
| Short-circuit protection: | pulsing |
| Voltage drop at IL: Voltage drop IL = 200 mA, switching element on: | ≤ 5 V |
| Operating current: | 8 ... 300 mA |
| Off-state current: Off-state current UB = 1.1 x Ue, switching element off: | 0 ... 1 mA |
| Residual voltage: | at maximum load ≤ 5 V |
| No-load supply current: | ≤ 1 mA |
| Time delay before availability: | ≤ 90 ms |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, red |
| Rated operating voltage: | 24 ... 250 V DC / 24 ... 230 V AC |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type: | Connector plug 7/8 inch-16 UN , 3-pin |
| Housing material: | ABS (TSG), bottom Al |
| Sensing face: | ABS |
| Housing base: | Aluminum |
| Degree of protection: | IP67 |
| Note: | The mounting conditions must be checked on a case-by-case basis depending on the application in question. |
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 3,80 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |