451255
924AB3HM-L2P
Inductive analog sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Degree of protection: IP67fa
| Installation: | non-flush |
| Measurement range: | 2 ... 5 mm |
| Output type: | 3-wire |
| Operating voltage: | 13.5 ... 30 V |
| Output signal: | 1 ... 9 V |
| Reverse polarity protection: | yes |
| Short-circuit protection: | no |
| Recovery time: | 1 ... 20 ms |
| Load resistor: | 0 ... 2 kOhm |
| Switching state indicator: | no |
| MTTFd: | 1733 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Output resistance: | max. 50 Ω |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | 0 ... 60 °C (32 ... 140 °F) |
| Connection type: | Connector plug M12 x 1 , 4-pin |
| Housing material: | brass, nickel-plated |
| Sensing face: | Ceramic |
| Degree of protection: | IP67 |
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,06 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |