View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
421132
RL28-55-Z/49/82b/112
Poproś o ofertę
Pepperl+Fuchs 421132
RL28-55-Z/49/82b/112
Retroreflective sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Retroreflective sensor with polarization filter, Ultra bright LEDs for power on, weak signal indication and switching state, Programmable time function GAN, GAB, IAB and GAN-IAB as double function, Not sensitive to ambient light, even with switched energy saving lamps, Waterproof, degree of protection IP67fa
Parametry techniczne
| Effective detection range: | 0 ... 17 m |
| Reflector distance: | 0.05 ... 17 m |
| Threshold detection range: | 21 m |
| Reference target: | H85-2 reflector |
| Light source: | LED |
| Light type: | modulated visible red light , 660 nm |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 290 mm at a distance of 17 m |
| Angle of divergence: | emitter 1.2° receiver 2° |
| Ambient light limit: | 80000 Lux |
| MTTFd: | 690 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements: | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 40 mA |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control for 10;s immediately inactive if 4 light beam interruptions take place |
| Switching type: | light/dark on, switchable . (selectable, light/dark switching is only activated if the receiver has 'dark on' selected.) |
| Signal output: | 1 NPN, 1 PNP synchronized-switching, short-circuit protected, reverse polarity protected , open collectors |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 200 mA |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Timer function: | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.02 s ... 1 s |
| Product standard: | EN 60947-5-2 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 75 °C (-40 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 65.5 mm |
| Degree of protection: | IP67 |
| Connection: | 5-pin, M12 x 1 connector, 90° rotatable |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | plastic |
| Material: Connector: | metal |
| Mass: | approx. 100 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Vietnam |
| EAN: | 4050143054404 |
| Waga: | 0,15 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |