Pepperl+Fuchs 299669

DoorScan-I

Sensor module, interface

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

Sensor module for configurable DoorScan® presence sensor, Multi-function interface with full operation, Complete system supply for the entire system for one door, Can also be used to supply the emitter and receiver modules with power, Single button commissioning with automatic Teach-in function, Function: Open and secure, Sensor principle: Active infrared scannerfa

Parametry techniczne

Operating mode: Background evaluation
Safety Integrity Level (SIL): SIL 2
Performance level (PL): PL d
Category: Cat. 2
MTTFd: 2716 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 90 %
Function indicator: Interface: Red LED: detection, excess gain, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status
Operating voltage: 24 V DC +/- 20 %
No-load supply current: 30 mA
Test input: high level ≥ 15 V low level ≤ 2 V
Control input: Standby active at U = 11 V DC at 30 V DC
Switching type: light on
Signal output: switchable NPN or PNP , short-circuit protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA
Response time: ≤ 52 ms ≤ 200 ms in boost operating mode
Functional safety: ISO 13849-1 ; EN 61508 part1-4
Product standard: EN 12978
CCC approval: CCC approval / marking not required for products rated ≤36 V
Ambient temperature: -30 ... 60 °C (-22 ... 140 °F)
Mounting height: max. 3500 mm
Degree of protection: IP54 (iwhen mounted)
Connection: plug strip , 6-pin
Mass: approx. 30 g

Parametry logistyczne

ECCN:
Kraj pochodzenia: Vietnam
EAN: 4050143051335
Waga: 0,05 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m