Pepperl+Fuchs
299664
DoorScan-DS-2P-1200
Pepperl+Fuchs 299664
DoorScan-DS-2P-1200
Active infrared scanner
Opis
Moving presence sensor for automatic doors, SIL 2, certified in accordance with DIN 18650/EN 16005, Exceptional detection reliability, Reliable operation with all floor coverings, Complete protection up to the wall without sensor shutoff, Function: Open and secure, Sensor principle: Active infrared scannerfa. DoorScan is a presence sensor for automatic revolving doors. It uses active infrared technology to perform background evaluation. The sensor is suitable for mobile or stationary mounting. Because the emitter and receiver module can be repositioned freely, the field of view can also be adjusted to fit the door width. An interface controls both sides of the door and establishes the link to the door controller. DoorScan meets the requirements of DIN 18650 and is a safety system fulfilling PL d in accordance with DIN EN ISO 13849-1 used in conjunction with a secure door controller that generates and evaluates the test signals.
Parametry techniczne
| Detection range min.: | 0 ... 1500 mm |
| Detection range max.: | 0 ... 3500 mm (Upright CA test body) |
| Sensing range: | 1000 mm at installation height of 2100 mm |
| Light source: | IRED 850 nm |
| Black/White difference (6 %/90 %): | < 2 % at 2000 mm sensor range |
| Number of beams: | 10 |
| Operating mode: | Background evaluation |
| Diameter of the light spot: | 8 cm at 2000 mm sensor range |
| Safety Integrity Level (SIL): | SIL 2 |
| Performance level (PL): | PL d |
| Category: | Cat. 2 |
| MTTFd: | 112.7 a |
| Mission Time (TM): | 10 a |
| Function indicator: | Receiver: Red LED: detection, excess gain, fault code Interface: Red LED: detection, excess gain, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status |
| Control elements: | Teach-In key , DIP-switch for selection of operating modes |
| Operating voltage: | 24 V DC +/- 20 % |
| No-load supply current: | max. 200 mA |
| Power consumption: | 4.8 W |
| Test input: | high level ≥ 15 V low level ≤ 2 V |
| Control input: | Standby active at U = 11 V DC at 30 V DC |
| Switching type: | light on |
| Signal output: | switchable NPN or PNP , short-circuit protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Response time: | ≤ 52 ms ≤ 200 ms in boost operating mode |
| Functional safety: | ISO 13849-1 ; EN 61508 part1-4 |
| Product standard: | EN 12978 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
| Housing length L: | 1200 mm |
| Mounting height: | max. 3500 mm |
| Degree of protection: | IP54 (iwhen mounted) |
| Connection: | Plug-in terminal with 6-wire connection cable |
| Material: Housing: | Aluminum / PA |
| Material: Optical face: | PC (Polycarbonate) |
| Mass: | approx. 2100 g |
| Dimensions: | (W x H x D) : 42 mm x 1200 mm x 37 mm |
| Scope of delivery: | Sensor system for hinge side and leading edge side (2 emitter and receiver modules each, 1 interface module, connecting cable, 2 housing profiles and optical covers each, 4 end caps) |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |