Pepperl+Fuchs
297833
ML100-55-G/95/102
Pepperl+Fuchs 297833
ML100-55-G/95/102
Retroreflective sensor for glass detection
Opis
Retroreflective sensor for glass detection, plastic housing, detection range: 2.5 m, red light, teach-in, light/dark on, NPN output, M8 plug, Miniature design, Detects transparent materials, TEACH-IN switch for setting the contrast detection levels, Automatic adjustment in case of soiling in contrast detection mode, Very bright, highly visible light spotfa. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Parametry techniczne
| Effective detection range: | 0 ... 2.5 m |
| Reflector distance: | 0.05 ... 2.5 m |
| Threshold detection range: | 2.5 m |
| Reference target: | H50 reflector |
| Light source: | LED |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 180 mm at a distance of 2.5 m |
| Angle of divergence: | approx. 4 ° |
| Optical face: | frontal |
| Ambient light limit: | EN 60947-5-2:2007+A1:2012 |
| MTTFd: | 860 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: power on Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
| Function indicator: | LED yellow: lights up when receiving the light beam OFF when light beam is interrupted |
| Control elements: | Teach-In rotary switch |
| Control elements: | Light-on/dark-on changeover switch preset to light on |
| Contrast detection levels: | 18 % - clear glass bottles 40 % - colored glass or opaque materials adjustable due to Teach-In switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: light on |
| Signal output: | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 31 mm |
| Housing depth: | 20 mm |
| Degree of protection: | IP67 |
| Connection: | Connector M8 x 1 , 4-pin |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 10 g |
| Tightening torque, fastening screws: | 0.6 Nm |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |