Pepperl+Fuchs
284586-100002
VLD700-F280-2E2-1000
Pepperl+Fuchs 284586-100002
VLD700-F280-2E2-1000
Laser light sensor
Opis
The SmartRunner Detector performs high-precision area monitoring and switches as soon as the smallest objects enter the field of detection. The detector is based on innovative SmartRunner technology and combines the light section method for detecting height profiles with a 2-D vision sensor. The light section method involves projecting a laser line onto an object. This laser line is then detected by a camera at a specific angle. A height profile is then created using the triangulation principle. This innovative laser technology provides reliable measurements on different surfaces. Laser light sensor for field monitoring; Resolution: 752 x 480 pixel; Measuring range: X = 40 ... 310 mm, Z = 60 ... 700 mm; Scan rate: 30 s-1; 2 digital outputs; RS-485 interfacefa
Parametry techniczne
| Measurement range: | X = 40 ... 310 mm ; Z = 60 ... 700 mm |
| Light source: | laser diode |
| Light type: | red laser + Integrated LED lightning red 650 nm |
| Laser nominal ratings: Note: | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | Measurement laser: 660 nm |
| Laser nominal ratings: Pulse length: | Measurement laser: 2 ms |
| Laser nominal ratings: Maximum optical power output: | Measurement laser: 15 mW |
| Laser nominal ratings: Laser monitoring: | The safety system switches off the laser when the laser current is too high |
| Object size: | > 0.1 mm at min. read distance |
| Scan rate: | 30 s-1 |
| MTTFd: | 20 a |
| Mission Time (TM): | 10 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Diagnostics indicator: | LED yellow / red |
| Function indicator: | Trigger: LED yellow ; object in evaluation range : LED red / green |
| Control elements: | 2 push-buttons |
| Operating voltage: | 24 V ± 20 % , PELV |
| No-load supply current: | max. 250 mA |
| Power consumption: | max. 6 W , Outputs without load |
| Interface type: | RS 485 interface |
| Physical: | Switchable terminal resistor |
| Protocol: | binary code |
| Transfer rate: | 38400 ... 230400 Bit/s |
| Input voltage: | 24 V |
| Number/Type: | External triggering + 1 Input |
| Switching threshold: | low: < 2.5 V, high: > 8 V |
| Number/Type: | 2 digital outputs |
| Switching type: | PNP |
| Switching voltage: | 24 V |
| Switching current: | 150 mA each output |
| Standard conformity: Noise immunity: | EN 61000-6-2:2005 |
| Standard conformity: Emitted interference: | EN 61000-6-4:2007/A1:2011 |
| Standard conformity: Degree of protection: | EN 60529 |
| Standard conformity: Shock and impact resistance: | EN 60068-2-27:2009 |
| Standard conformity: Laser class: | IEC 60825-1:2007 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Approvals: | CE |
| Operating temperature: | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Degree of protection: | IP67 |
| Connection: | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system |
| Material: Housing: | PC/ABS |
| Material: Optical face: | Plastic pane |
| Mass: | approx. 125 g |
| Tightening torque, fastening screws: | max. 2 Nm |
| Note: | Security Instructions: - Read the operating instructions before attempting commissioning - Installation, connection and adjustments should only be undertaken by specialist personnel - Not a safety component in accordance with the EU Machinery Directive |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |