Pepperl+Fuchs
283822
HD2-GTR-4PA.PN
Pepperl+Fuchs 283822
HD2-GTR-4PA.PN
PROFINET Power Hub, Gateway Module
Opis
Gateway PROFINET RT to 4 x PROFIBUS PA segments, Up to 32 devices per PROFIBUS PA segment, Installation in Zone 2/Class I, Div. 2, Ring and system redundancy, Integrated webserver for diagnosticspa. The PROFINET to PROFIBUS PA gateway integrates communication of 4 PA segments into PROFINET I/O systems. The gateway is part of the FieldConnex. Power Hub system. The gateway operates with power supply modules connected to the same or a separate motherboard. The gateway provides a PA master for each segment and thus enables short bus cycle times. One single gateway supports S2 system redundancy and ring redundancy. A complete toolchain supports the engineering for system integration. A gateway device type manager (DTM) and a webserver enable access to both status and diagnostics of the gateway. The gateway DTM enables communication for parameterization, diagnostics, and status information to PROFIBUS PA devices through vendors’ DTMs. A library of STEP 7 software modules for integration into Siemens PCS7 is available. The PROFINET gateway is an ideal solution for new plants and for upgrading existing PROFIBUS PA installations from PROFIBUS DP to PROFINET.
Parametry techniczne
| Design / Mounting: | Motherboard based |
| Rated voltage: | 19.2 ... 35 V SELV/PELV |
| Rated current: | typ. 135 mA |
| Power dissipation: | approx. 3.5 W |
| Number of segments: | 4 |
| Number of devices per segment: | max. 32 |
| Fieldbus type: | PROFIBUS PA |
| Number of ports: | 2 |
| Protocol: | PROFINET |
| Ethernet Interface: | Connector , 2x RJ45 |
| Transfer rate: | 100 MBit/s |
| Redundancy: | Ring (MRP) , System S2 |
| LED ETH1 LINK 2: | green: link status |
| LED ETH1 ACT: | yellow: activity status |
| LED ETH2 LINK: | green: link status |
| LED ETH2 ACT: | yellow: activity status |
| LED ERR: | red 2 Hz flashing: Ethernet error |
| LED Seg 1...4: | red 2 Hz flashing: PA error, red and LED DP/ERR red: MAU error |
| LED PWR: | green: Power on |
| LED DP/ERR: | red 2 Hz flashing: DP error ; red: Hardware error |
| LED Red.: | yellow: redundant operation primary device ; yellow 2 Hz flashing: synchronization or redundancy not available |
| CH/PROFIBUS DP: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| PROFIBUS DP/Supply: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| CH/CH: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| CH/Ethernet: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| All circuits/FE: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| Ethernet/Supply: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2011 |
| Degree of protection: | IEC 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) vertically mounted , -40 ... 70 °C (-40 ... 158 °F) horizontally mounted |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 95 % non-condensing |
| Shock resistance: | 15 g 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Pollution degree: | max. 2, according to IEC 60664 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Housing material: | Polycarbonate |
| Housing width: | 40 mm |
| Housing height: | 106 mm |
| Housing depth: | 128 mm |
| Degree of protection: | IP20 |
| Mass: | 250 g |
| Mounting: | motherboard mounting |
| Statement of conformity: | TÜV 15 ATEX 7735 X |
| Electromagnetic compatibility: Group, category, type of protection, temperature class: | II 3 G Ex ec IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 |
| IECEx approval: | IECEx TUR 16.0007X |
| Directive conformity: Approved for: | Ex ec IIC T4 Gc |
| Marine approval: | pending |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |