276877
MBHC-FB-4.GT
Fieldbus Power Hub, Motherboard for Gateway and Power Supply Modules
4 segments, simplex, individual modules per segment, For PROFIBUS PA, For gateway and power supply modules, High-power trunk: Live work on devices in any hazardous area, Optional advanced diagnosticspa. The motherboard is a system component of the FieldConnex. Power Hub, a modular fieldbus power supply for 4 segments. It is the wiring interface for one gateway, one advanced diagnostic module, and 4 power supply modules. The power supply supports explosion protection, e. g., the high‑power trunk for long cable lengths and high device counts. The Power Hub supports advanced diagnostics for fast fieldbus commissioning and online monitoring. Sockets for all modules enable simple installation and replacement without tools. Wire connections can be selected as spring terminals or screw terminals. The motherboard supports a choice of gateways for different host protocols. A PROFIBUS PA master for each segment enables short bus cycle times. The DCS can access the advanced diagnostic module directly via the gateway without additional wiring or configuration. This design allows the most compact cabinet layout. Excellent availability and a long service life are achieved through the following features: A passive impedance filter per segment without active electronic components, a high‑availability fieldbus termination, and plugs with retaining screws.
| Design / Mounting: | Motherboard based |
| Connection: | redundant |
| Rated voltage: | 19.2 ... 35 V SELV/PELV |
| Rated current: | 12 A |
| Power dissipation: | typ. 0.4 W per segment |
| Number of segments: | 4 simplex |
| Terminating resistor: | 100 Ω integrated |
| Fault signal: | VFC alarm 1 A, 50 V DC, normally closed |
| Rotary switch: | bus addressing, gateway-specific |
| Fieldbus segment/Fieldbus segment: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| Fieldbus segment/Supply: | functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2011 |
| Degree of protection: | IEC 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 95 % non-condensing |
| Shock resistance: | 10 g , 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Pollution degree: | max. 2, according to IEC 60664 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Connection type: | plug-in terminals , spring terminal and screw terminal |
| Core cross-section: | 2.5 mm2 |
| Housing material: | Polycarbonate |
| Degree of protection: | IP20 |
| Mass: | approx. 540 g |
| Mounting: | DIN mounting rail |
| Certificate: | TÜV 15 ATEX 7735 X |
| Electromagnetic compatibility: Marking: | II 3G Ex ec IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012 |
| IECEx approval: | IECEx TUR 16.0007X |
| Directive conformity: Approved for: | Ex ec IIC T4 Gc |
| Marine approval: | pending |
| ECCN: | |
| Kraj pochodzenia: | Singapur |
| EAN: | 4050143075935 |
| Waga: | 0,68 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |