View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
276405
S1SD-1DI-1R
Poproś o ofertę
Pepperl+Fuchs 276405
S1SD-1DI-1R
Switch Amplifier
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors or AC/DC voltage sources, Relay contact output, Timer function, Configurable by DIP switches, Connection via screw terminalspa. This signal conditioner provides the galvanic isolation between field circuits and control circuits. The device transmits the status of 2- and 3-wire sensors to the relay output. The device has an input for the following digital signals:. Mechanical contacts. 2-wire sensors (NAMUR, SN, DC, S0). 3-wire sensors (NPN, PNP, push-pull). AC/DC voltage sources. The input is reverse polarity protected and short-circuit proofed. The connected sensors can also be supplied externally. The device has an adjustable on delay, an off delay, or an one-shot function for the relay contact output. The device is easily configured by the use of DIP switches. The device can be powered via terminals or Power Bus.
Parametry techniczne
| Signal type: | Digital Input |
| Connection: | Power Bus or terminals 1-, 2+ |
| Rated voltage: | 16.8 ... 31.2 V DC |
| Power dissipation: | 0.6 W |
| Power consumption: | 1.1 W |
| Connection side: | field side |
| NAMUR sensor: Type: | 2-wire |
| NAMUR sensor: Connection: | terminals 5+, 6 |
| NAMUR sensor: Signal: | acc. to EN 60947-5-6 (NAMUR) |
| NAMUR sensor: Sensor supply: | 8 V |
| NAMUR sensor: Open-circuit: | < 0.1 mA |
| NAMUR sensor: Switching point: | 1.2 ... 2.1 mA |
| NAMUR sensor: Short-circuit: | > 6 mA |
| NAMUR sensor: Input impedance: | 1 kΩ |
| Mechanical contact: Type: | 2-wire |
| Mechanical contact: Connection: | terminals 5+, 6 |
| Mechanical contact: Sensor supply: | 15 V |
| Mechanical contact: External supply: | ≤ 32 V |
| Mechanical contact: Switching point: | 8 ... 10 V / 1.2 ... 2.1 mA |
| Mechanical contact: Input impedance: | 4 kΩ |
| SN sensor: Type: | 2-wire |
| SN sensor: Connection: | terminals 5+, 6 |
| SN sensor: Sensor supply: | 8 V |
| SN sensor: Open-circuit: | < 0.1 mA |
| SN sensor: Switching point: | 1.2 ... 2.1 mA |
| SN sensor: Short-circuit: | > 6 mA |
| SN sensor: Input impedance: | 1 kΩ |
| 2-wire DC sensor: Type: | 2-wire |
| 2-wire DC sensor: Connection: | terminals 5+, 6 |
| 2-wire DC sensor: Signal: | acc. to EN 60947-5-2 |
| 2-wire DC sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| 2-wire DC sensor: External supply: | ≤ 32 V |
| 2-wire DC sensor: Switching point: | 2 ... 5 mA |
| 2-wire DC sensor: Input impedance: | 1 kΩ |
| S0 sensor: Type: | 2-wire |
| S0 sensor: Connection: | terminals 5+, 6 |
| S0 sensor: Signal: | acc. to EN 62053-31 , Type B |
| S0 sensor: Sensor supply: | 15 V |
| S0 sensor: Switching point: | 0.15 ... 2 mA |
| S0 sensor: Input impedance: | 4 kΩ |
| NPN sensor: Type: | 3-wire |
| NPN sensor: Connection: | terminals 5+, 6, 7- |
| NPN sensor: Signal: | acc. to EN 60947-5-2 |
| NPN sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| NPN sensor: External supply: | ≤ 32 V |
| NPN sensor: Switching point: | 3 ... 5 V |
| NPN sensor: Input impedance: | 4 kΩ |
| PNP sensor: Type: | 3-wire |
| PNP sensor: Connection: | terminals 5+, 6, 7- |
| PNP sensor: Signal: | acc. to EN 60947-5-2 |
| PNP sensor: Sensor supply: | 16 V / 25 mA , short-circuit protected |
| PNP sensor: External supply: | ≤ 32 V |
| PNP sensor: Switching point: | 8 ... 10 V |
| PNP sensor: Input impedance: | 4 kΩ |
| AC/DC voltage source: Connection: | terminals 7, 8 |
| AC/DC voltage source: Signal: | 24 V AC/DC |
| AC/DC voltage source: Switching point: | 10 ... 15 V |
| AC/DC voltage source: Input impedance: | > 680 kΩ |
| AC/DC voltage source: Connection: | terminals 7, 8 |
| AC/DC voltage source: Signal: | 115 V AC/DC |
| AC/DC voltage source: Switching point: | 40 ... 60 V |
| AC/DC voltage source: Input impedance: | > 680 kΩ |
| AC/DC voltage source: Connection: | terminals 7, 8 |
| AC/DC voltage source: Signal: | 230 V AC/DC |
| AC/DC voltage source: Switching point: | 80 ... 115 V |
| AC/DC voltage source: Input impedance: | > 680 kΩ |
| Connection side: | control side |
| Connection: | terminals 3, 4: |
| Output: | signal, relay |
| Contact loading: | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load |
| Minimum switch current: | 2 mA / 24 V DC |
| Energized/De-energized delay: | ≤ 20 ms / ≤ 20 ms |
| Mechanical life: | 107 switching cycles |
| Switching frequency: | ≤ 10 Hz |
| Output/power supply: | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Input/Other circuits: | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Control elements: | DIP-switch |
| Configuration: | via DIP switches |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | EN 61010-1:2010 |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Damaging gas: | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Core cross-section: | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
| Mass: | approx. 60 g |
| Dimensions: | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Optional accessories: | power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |