View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
276403
S1SL-1AI-1C
Poproś o ofertę
Pepperl+Fuchs 276403
S1SL-1AI-1C
Passive Isolator
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
This signal conditioner provides the galvanic isolation between field circuits and control circuits. 1-channel signal conditioner, Field side loop powered, Current input/output 0/4 mA .. 20 mA, Accuracy 0.1 %, Reverse polarity protection, Connection via screw terminalspa. The device transfers a 0/4 mA ... 20 mA signal of a current source from the field side to the control side. This device is loop powered. No additional power supply has to be connected.
Parametry techniczne
| Signal type: | Analog input |
| Operation time: | MTBF: 2865 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F) |
| Rated voltage: | 2.2 ... 30 V DC , loop powered |
| Power dissipation: | 0.05 W |
| Power consumption: | 0.3 W |
| Connection side: | field side |
| Connection: | terminals 5+, 6- |
| Input signal: | 0/4 ... 20 mA , max. 50 mA |
| Input voltage: | ≥ 2.3 V + I x load , max. 30 V |
| Voltage drop: | ≤ 2.3 V |
| Connection side: | control side |
| Connection: | terminals 3-, 4+ |
| Analog current output: | 0/4 ... 20 mA, load ≤ 600 Ω |
| Ripple: | ≤ 10 mV eff |
| Accuracy: | max. 0.1 % of full-scale value |
| Deviation: Influence of load: | 0.05 % of the measured value per 100 Ω |
| Influence of ambient temperature: | < 100 ppm/K of full-scale value |
| Frequency range: | 0 ... 100 Hz |
| Rise time/fall time: | ≤ 3.5 ms |
| Field circuit/control circuit: | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | EN 61010-1:2010 |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Damaging gas: | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Core cross-section: | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
| Mass: | approx. 70 g |
| Dimensions: | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Certificate: | DEMKO 16 ATEX 1750X |
| Electromagnetic compatibility: Marking: | II 3G Ex nA IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 |
| UL approval: | E106378 |
| IECEx approval: | IECEx UL 16.0116X |
| Directive conformity: Approved for: | Ex nA IIC T4 Gc |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |