Pepperl+Fuchs 267075-100483

OBG5000-R100-E5F-IO

Retroreflective sensor (glass)

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

The R100 series miniature optical sensors are the first devices of their kind to offer an endto- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. Retroreflective sensor with polarization filter for clear object detection, Miniature design with versatile mounting options, Detects transparent objects, i.e., clear glass, PET and transparent films, Two machines in one: clear object detection or reflection operating mode with long range, High degree of protection IP69K, IO-link interface for service and process datafa. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

Parametry techniczne

Effective detection range: 0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Reflector distance: 0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Threshold detection range: 6 m
Reference target: H85-2 reflector
Light source: LED
Light type: modulated visible red light
LED risk group labelling: exempt group
Diameter of the light spot: approx. 170 mm at a distance of 3.5 m
Angle of divergence: approx. 5 °
Ambient light limit: EN 60947-5-2
MTTFd: 600 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Operation indicator: LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator: Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements: Teach-In key
Control elements: 5-step rotary switch for operating modes selection
Contrast detection levels: 10 % - clean, water filled PET bottles 18 % - clear glass bottles 40 % - colored glass or opaque materials Adjustable via rotary switch
Operating voltage: 10 ... 30 V DC
Ripple: max. 10 %
No-load supply current: < 25 mA at 24 V supply voltage
Protection class: III
Interface type: IO-Link ( via C/Q = BK )
IO-Link Revision: 1.1
Device ID: 0x110A08 (1116680)
Transfer rate: COM 2 (38.4 kBaud)
Min. cycle time: 2.3 ms
Process data width: Process data input 2 Bit Process data output 2 Bit
SIO mode support: yes
Compatible master port type: A
Pre-fault indication output: 1 PNP function reserve output (alarm), short-circuit protected, protected from reverse polarity, open collector
Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - BK: PNP normally open / dark-on, IO-Link Alarm output - WH: PNP normally closed
Signal output: 1 PNP, short-circuit protected, reverse polarity protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA , resistive load
Usage category: DC-12 and DC-13
Voltage drop: ≤ 1.5 V DC
Switching frequency: 500 Hz
Response time: 1 ms
Communication interface: IEC 61131-9
Product standard: EN 60947-5-2
UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient temperature: -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature: -40 ... 70 °C (-40 ... 158 °F)
Housing width: 11 mm
Housing height: 37.1 mm
Housing depth: 21.5 mm
Degree of protection: IP67 / IP69 / IP69K
Connection: 2 m fixed cable
Material: Housing: PC (Polycarbonate)
Material: Optical face: PMMA
Mass: approx. 36 g
Cable length: 2 m

Parametry logistyczne

ECCN:
Kraj pochodzenia: SG
EAN:
Waga: 0,00 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m