267075-100428
OBT300-R100-E5-V31-L
Triangulation sensor (BGS)
The R100 series miniature optical sensors are the first devices of their kind to offer an endto- end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. Laser diffuse mode sensor with adjustable background suppression, Miniature design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, External TEACH-INfa. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.
| Detection range: | 7 ... 300 mm |
| Detection range min.: | 7 ... 25 mm |
| Detection range max.: | 7 ... 300 mm |
| Adjustment range: | 25 ... 300 mm |
| Reference target: | standard white, 100 mm x 100 mm |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 680 nm |
| Laser nominal ratings: Beam divergence: | > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm |
| Laser nominal ratings: Pulse length: | 3 µs |
| Laser nominal ratings: Repetition rate: | approx. 13 kHz |
| Laser nominal ratings: max. pulse energy: | 10.4 nJ |
| Black/White difference (6 %/90 %): | < 5 % at 150 mm |
| Diameter of the light spot: | approx. 1 mm at a distance of 200 mm |
| Angle of divergence: | approx. 0.3 ° |
| Ambient light limit: | EN 60947-5-2 : 40000 Lux |
| MTTFd: | 560 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | Green LED: Permanently lit - power on Flashing (4 Hz) - short circuit |
| Function indicator: | LED yellow: constantly on - object detected constantly off - object not detected |
| Control elements: | Light-on/dark-on changeover switch |
| Control elements: | Sensing range adjuster |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA at 24 V supply voltage |
| Protection class: | III |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally open / light-on Teach input - Pin2: High-active input |
| Signal output: | 1 PNP, short-circuit protected, reverse polarity protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Usage category: | DC-12 and DC-13 |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1650 Hz |
| Response time: | 300 µs |
| Communication interface: | IEC 61131-9 |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1:2014 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 44.5 mm |
| Housing depth: | 21.5 mm |
| Degree of protection: | IP67 / IP69 / IP69K |
| Connection: | M8 x 1 connector, 4-pin |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 10 g |
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |