Pepperl+Fuchs 267026

MBHC-FB-4R.YO

Compact Fieldbus Power Hub Motherboard for Yokogawa ALF111

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

The FieldConnex. Compact Power Hub is a modular fieldbus power supply for four segments with lowest power dissipation and smallest foot print. It supports explosion protection e.g. the High-Power Trunk for longest cable run and highest device count. The Power Hub supports optional Advanced Diagnostics for fast fieldbus commissioning and online monitoring. 4 segments, redundant, individual modules per segment, Customized for Yokogawa, ALF 111, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1pa. The motherboard is the wiring interface with redundant connectors for direct DCS hook-up via the AKB system cable. The version with type code extension ".R" has host connections on the right side for symmetrical cabinet layout. Sockets for all modules enable simple installation and replacement without tools. For power redundancy with seamless transfer, pairs of modules feed each segment. Wire connections can be selected as spring terminals or screw terminals. This design allows the most compact cabinet layout. Excellent availability and a very long service life are achieved through: passive impedance filter per segment, high-availability fieldbus termination and plugs with retaining screws. Electronics are optimized for lowest power dissipation and compactness.

Parametry techniczne

Design / Mounting: Motherboard based
Connection: redundant
Rated voltage: 19.2 ... 35 V SELV/PELV
Rated current: 12 A
Power dissipation: typ. 0.4 W per segment
Number of segments: 4 redundant
Host-side: Yokogawa ALF111 for AKB336 interface cable
Terminating resistor: 100 Ω integrated
Fault signal: VFC alarm 1 A, 50 V DC, normally closed
Fieldbus segment/Fieldbus segment: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Fieldbus segment/Supply: functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff
Electromagnetic compatibility: Directive 2014/30/EU: EN 61326-1:2013 (industrial locations)
Electromagnetic compatibility: NE 21:2012
Degree of protection: IEC 60529
Fieldbus standard: IEC 61158-2
Shock resistance: EN 60068-2-27
Vibration resistance: EN 60068-2-6
Ambient temperature: -40 ... 70 °C (-40 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Relative humidity: < 95 % non-condensing
Shock resistance: 15 g , 11 ms
Vibration resistance: 1 g , 10 ... 150 Hz
Pollution degree: max. 2, according to IEC 60664
Corrosion resistance: acc. to ISA-S71.04-1985, severity level G3
Connection type: plug-in terminals , spring terminal and screw terminal
Core cross-section: screw terminals: 0.25 ... 2.5 mm2 spring terminals: 0.25 ... 1.5 mm2
Housing material: Polycarbonate
Degree of protection: IP20
Mass: approx. 610 g
Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001
Certificate: TÜV 10 ATEX 555761X
Electromagnetic compatibility: Marking: II 3G Ex ec IIC T4 Gc
Directive conformity: Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
FM approval: CoC 3024816, CoC 3024816C
Directive conformity: FM certificate: FM 19 US 0015 X and FM 19 CA 0011 X
Directive conformity: FM marking: AEx/Ex ec IIC T4
Directive conformity: Approved for: Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex nA IIC T4 , AEx/Ex ec IIC T4
IECEx approval: IECEx TUN 13.0037X
Directive conformity: Approved for: Ex ec IIC T4 Gc
Marine approval: DNV A-14038, pending for MBHC-FB-4R.YO.R
Supplementary information: Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Parametry logistyczne

ECCN:
Kraj pochodzenia: Singapur
EAN: 4050143075553
Waga: 0,81 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m