View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
261306
WHA-ADP2-F8B2-0-P0-Z1-EX1
Poproś o ofertę
Pepperl+Fuchs 261306
WHA-ADP2-F8B2-0-P0-Z1-EX1
WirelessHART Adapter
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
1-channel, Installation in Zone 1, WirelessHART Adapter, Battery operated, Also supplies field device, Input 2-wire HART transmitters and 2-wire HART current sources, Output WirelessHART wireless interface, Direct mounting on HART or 4 mA .. 20 mA field device, Rotatable antennapa. The device upgrades a conventional HART or 4 mA .. 20 mA field device with a WirelessHART interface. It is mounted either directly to the cable gland entry or separated from the field device. The device contains a battery pack which also powers the field device. Depending on the parameterization, battery lifetimes up to 5 years are possible. This allows autonomous measurements. The rotatable antenna can be brought in the optimal position, regardless of the mounting orientation of the field device. The unit is easily programmed with a configuration tool (DTM or DD). For additional information, refer to the manual and www.pepperl-fuchs.com.
Parametry techniczne
| Rated voltage: | 7.2 V DC , battery operated |
| Output rated operating current: | 4 ... 20 mA |
| Supply: | loop power for field devices voltage 8 ... 23 V DC, adjustable in steps of 0.1 V |
| Programming interface: | interface LPI |
| Connection: | terminals 1, 2, 3, 4, 5, 6 multiple wirings available , depending on operating mode |
| Current: | 4 ... 20 mA |
| HART communication: Protocol: | HART 7.3, backward compatible |
| HART communication: Number of devices: | - one passive 4 ... 20 mA/HART field device - up to 4 HART field devices in multidrop mode |
| HART communication: Transfer rate: | 1200 Bit/s |
| HART communication: Parameters: | primary/secondary master, preambles, retries and short address scan ranges |
| Interface: | omnidirectional dipole antenna, adjustable in vertical plane |
| Output variables: | PV: loop current SV, TV, QV:configurable according to user requirement - adapter: temperature, battery voltage, energy consumed and estimated battery life-time - 4 ... 20 mA device: scaled or linearized process value - HART device: up to four process variables |
| Communication: | WirelessHART specification IEC 62591 - Physical layer: IEEE 802.15.4.2006 - Frequency range: 2.4 GHz (ISM band, license-free) - Transfer rate: 250 kBit/s - Maximum transmission power: +10 dBm (EIRP) - Range: 250 m outdoors, 50 m indoors (under reference conditions) - Communications standard: WirelessHART |
| Accuracy: | current input: 0.125 % of measuring range |
| Influence of ambient temperature: | current input: 5 µA/K |
| Display elements: | green LED: battry status yellow LED: communication status red LED: device status |
| Control elements: | 1 push botton for: - device status - enter/leave configuration mode - join trigger - factory reset |
| Configuration: | wired interface: - HART 7.1, FSK compatible - transmission rate: 1200 Bit/s - used for device commissioning with an handheld terminal or a configuration tool (DTM) |
| Parameter assignment: | - wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP) - device variables mapping - publishing of up to ten burst messages in a wireless network, period and trigger mode selectable - notification of up to five events from adapter and/or connected device(s) in a wireless network - scaling and linearization of 4 ... 20 mA signal of connected analog device - tuning of supply parameters for the connected device - locking/unlocking of device parameterization |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013, CLASS A |
| Radio and telecommunication terminal equipment: | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Electromagnetic compatibility: Directive 2014/53/EU: | EN 300328 V2.1.1:2017 , EN 301489-17 V3.1.1:2017 , EN 301489-1 V2.1.1:2017 |
| Electromagnetic compatibility: FCC CFR47 Part 15 B and C: | ANSI C63.4-2003 , FCC ID: SJC-M2140 |
| RoHS: Directive 2011/65/EU (RoHS): | EN 50581:2012 |
| Degree of protection: | IEC 60529 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-64 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | max. 90 % , noncondensing |
| Vibration resistance: | 20 ... 2000 Hz, 0,01 g2/Hz |
| Impact resistance: | 15 g, 11 ms |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Degree of protection: | IP66 |
| Material: | plastic |
| Mass: | approx. 750 g |
| Dimensions: | 92 x 89.5 x 92.8 mm (without cable glands and antenna) |
| Mounting: | mounting on field device , panel or pole mounting |
| EU-type examination certificate: | BVS 17 ATEX E 029 |
| RoHS: Marking: | II 2G Ex ia IIC T4/T3 Gb |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2014 |
| IECEx approval: IECEx certificate: | IECEX BVS 17.0023 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Designation: | battery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately) mounting set W-ACC-F8MK threads (NPT 1/2", NPT 3/4", G 1/2, M20) |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Deutschland |
| EAN: | 4050143065059 |
| Waga: | 0,92 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |