Pepperl+Fuchs
255742
HD2-FBPS-1.500
Pepperl+Fuchs 255742
HD2-FBPS-1.500
Fieldbus Power Hub, Power Supply Module
Opis
This Power Supply Module is a system component for the FieldConnex. Power Hub and can be plugged into the motherboard. It adapts current and voltage for the supply of fieldbus segments and field devices. Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PApa. This power supply features the highest output power and allows for maximum cable lengths and highest number of devices in hazardous areas with the High-Power Trunk concept. Reliability of communication is enhanced through galvanic isolation between segment and bulk power supply. Two LEDs indicate power and status. In redundant configuration two modules are connected in parallel via simple circuits ensuring seamless operation.
Parametry techniczne
| Design / Mounting: | Motherboard based |
| Rated voltage: | 19.2 ... 35 V DC |
| Rated current: | 910 ... 490 mA |
| Power dissipation: | typ. 1.8 W |
| Rated voltage: | 28 ... 30 V |
| Rated current: | 500 ... 10 mA |
| Short-circuit current: | 550 mA |
| LED ERR: | red flashing: short-circuit or undervoltage at output |
| LED PWR: | green if Uout > 28 V |
| Fieldbus segment/Supply: | functional insulation acc. to IEC 62103, rated insulation voltage 250 V AC |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 |
| Electromagnetic compatibility: | NE 21:2011 |
| Degree of protection: | IEC 60529 |
| Fieldbus standard: | IEC 61158-2 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 95 % non-condensing |
| Shock resistance: | 15 g 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Pollution degree: | max. 2, according to IEC 60664 |
| Corrosion resistance: | acc. to ISA-S71.04-1985, severity level G3 |
| Connection type: | motherboard specific |
| Core cross-section: | motherboard specific |
| Housing material: | Polycarbonate |
| Housing width: | 18 mm |
| Housing height: | 106 mm |
| Housing depth: | 128 mm |
| Degree of protection: | IP20 |
| Mass: | approx. 150 g |
| Mounting: | motherboard mounting |
| Outputs: Voltage: | 32 V |
| Certificate: | TÜV 04 ATEX 2500 X |
| Outputs: Marking: | II 3 G Ex nA IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: FM certificate: | FM 19 US 0015 X and FM 19 CA 0011 X |
| FM approval: FM marking: | AEx/Ex ec IIC T4 |
| IECEx approval: IECEx certificate: | IECEx TUN 13.0038X |
| IECEx approval: IECEx marking: | Ex nA IIC T4 Gc |
| Marine approval: | pending |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |