Pepperl+Fuchs 255106

MBHC-FB-8R.YO

Compact Fieldbus Power Hub Motherboard for Yokogawa ALF111

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

8 segments, redundant, individual modules per segment, Customized for Yokogawa, ALF 111, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1pa. The FieldConnex, compact Power Hub is a modular fieldbus power supply for eight segments with lowest power dissipation and smallest foot print. It supports explosion protection e.g. the high-power trunk for longest cable run and highest device count. The Power Hub supports optional advanced diagnostics for fast fieldbus commissioning and online monitoring. The motherboard is the wiring interface with connectors for direct DCS hook-up via the AKB 336 system cable. The version with type code extension ".R" has host connections on the right-hand side for symmetrical cabinet layout. Sockets for all modules enable simple installation and replacement without tools. For power redundancy with seamless transfer, pairs of modules feed each segment. Wire connections can be selected as spring terminals or screw terminals. This design allows the most compact cabinet layout. Excellent availability and a very long service life are achieved through: passive impedance filter per segment, high-availability fieldbus termination and plugs with retaining screws. Electronics are optimized for lowest power dissipation and compactness.

Parametry techniczne

Design / Mounting: Motherboard based
Connection: redundant
Rated voltage: 19.2 ... 35 V SELV/PELV
Rated current: 16 A
Power dissipation: typ. 0.4 W per segment
Number of segments: 8 redundant
Host-side: redundant Yokogawa ALF111 with AKB336 interface cables
Terminating resistor: 100 Ω integrated
Fault signal: VFC alarm 1 A, 50 V DC, normally closed
Fieldbus segment/Fieldbus segment: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Fieldbus segment/Supply: functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff
Electromagnetic compatibility: Directive 2014/30/EU: EN 61326-1:2013
Electromagnetic compatibility: NE 21:2011
Degree of protection: IEC 60529
Fieldbus standard: IEC 61158-2
Shock resistance: EN 60068-2-27
Vibration resistance: EN 60068-2-6
Ambient temperature: -40 ... 70 °C (-40 ... 158 °F)
Storage temperature: -40 ... 85 °C (-40 ... 185 °F)
Relative humidity: < 95 % non-condensing
Shock resistance: 15 g 11 ms
Vibration resistance: 1 g , 10 ... 150 Hz
Pollution degree: max. 2, according to IEC 60664
Corrosion resistance: acc. to ISA-S71.04-1985, severity level G3
Connection type: plug-in terminals , spring terminal and screw terminal
Core cross-section: 2.5 mm2
Housing material: Polycarbonate
Housing width: 268 mm
Housing height: 150 mm
Housing depth: 69 mm
Degree of protection: IP20
Mass: approx. 1350 g
Mounting: DIN mounting rail
Certificate: TÜV 10 ATEX 555761X
Electromagnetic compatibility: Marking: II 3G Ex ec IIC T4 Gc
Directive conformity: Directive 2014/34/EU: EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-7:2015
FM approval: FM19US0015X FM19CA0011X
Directive conformity: Approved for: Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex ec IIC T4
IECEx approval: IECEx TUN 13.0037X
Directive conformity: Approved for: Ex ec IIC T4 Gc
Marine approval: DNV TAA 0000272 , pending for MBHC-FB-8R.YO.R
Supplementary information: Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Parametry logistyczne

ECCN:
Kraj pochodzenia: Singapur
EAN: 4050143074792
Waga: 1,36 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m