View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
247196
KFD0-RO-2
Poproś o ofertę
Pepperl+Fuchs 247196
KFD0-RO-2
Relay Module
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
2-channel signal conditioner, 24 V DC supply (loop powered), Logic input 15 V DC .. 30 V DC, non-polarized, Relay contact output, Up to SIL 3 acc. to IEC 61508pa. This signal conditioner provides the galvanic isolation beetween field circuits and control circuits. The device switches circuits on the field side. Typical applications for the use of the device are remote reset, fire alarm testing or remote calibration of strain gauges. The outputs are galvanically isolated to the inputs. The inputs are not polarized and share a common reference potential. Each input of the device is protected by a fuse and an electronic current limiting.
Parametry techniczne
| Signal type: | Digital Output |
| Safety Integrity Level (SIL): | SIL 3 |
| Rated voltage: | loop powered |
| Power dissipation: | 0.8 W |
| Connection side: | control side |
| Connection: | terminals 7, 8, 9 |
| Input voltage: | 15 ... 30 V DC |
| Input current: | ≤ 21 mA per channel |
| Connection side: | field side |
| Connection: | terminals 1, 2, 3; 4, 5, 6 |
| Contact loading: | 230 V AC/4 A/cos φ > 0.7; 30 V DC/4 A resistive load |
| Energized/De-energized delay: | approx. 10 ms / approx. 5 ms |
| Mechanical life: | 5 x 106 switching cycles |
| Electrical life: | 105 switching cycles , at maximium load |
| Switching frequency: | < 10 Hz |
| Input/Output: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/Output: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 65 °C (-4 ... 149 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 100 g |
| Dimensions: | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |