View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
244733
LS670-DA-EN/F2
Poproś o ofertę
Pepperl+Fuchs 244733
LS670-DA-EN/F2
Optical data coupler
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
The optical data coupler connects Ethernet modules to remote modules. These can move along a line of sight toward each other. The devices are ideal for conditions in automated storage and retrieval systems. Optical data coupler for fast Ethernet, 150 m detection range, red light, 7.5 MBit/s data rate, M12 plug, Independent of Ethernet protocol, Plug connection for fast mounting, No parameterization, Line indicator for signal strengthfa. The data transfer takes place with an average transfer rate of 7.5 MBit/s full duplex. The data rate remains constant regardless of distance. Data packets or telegrams are not saved but rather immediately transferred.
Parametry techniczne
| Effective detection range: | 0 ... 150 m |
| Threshold detection range: | 180 m |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Laser nominal ratings: Note: | VISIBLE LASER RADIATION , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser nominal ratings: Laser class: | 1M |
| Laser nominal ratings: Wave length: | 660 nm |
| Laser nominal ratings: Pulse length: | 8 ns |
| Laser nominal ratings: Repetition rate: | 62.5 MHz |
| Laser nominal ratings: Maximum optical power output: | 60 mW |
| Diameter of the light spot: | 1.5 m at a distance of 100 m |
| Angle of divergence: | 0.9 ° |
| Ambient light limit: | > 10000 Lux |
| MTTFd: | 58.6 a |
| Mission Time (TM): | 10 a |
| Diagnostic Coverage (DC): | 0 % |
| Data flow indicator: | LED green: OPTO-Link LED yellow: LAN-Link LED red: ERROR |
| Diagnostics indicator: | LED red: OVERLOAD |
| Function indicator: | Signal strength (8 LED: Red, yellow, green) |
| Operating voltage: | 18 ... 30 V DC |
| No-load supply current: | 200 mA |
| Data rate: | 7.5 MBit/s |
| Interface type: | 100 BASE-TX |
| Pre-fault indication output: | 1 PNP, inactive when falling short of the stability control , short-circuit protected, max. 200 mA |
| Laser safety: | EN 60825-1:2007 |
| UL approval: | cULus Listed |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -20 ... 70 °C (-4 ... 158 °F) |
| Housing width: | 170 mm |
| Housing height: | 90 mm |
| Degree of protection: | IP65 |
| Material: Housing: | ABS / PC |
| Material: Optical face: | plastic |
| Mass: | 700 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |