236488
NBB5-18GM50-E2-T-V1
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 3-pin, Degree of protection: IP67fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 5 mm |
| Installation: | flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 4.05 mm |
| Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 18 mm x 18 mm x 1 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.7 |
| Reduction factor rBrass: | 0.4 |
| Installation conditions: A: | 10 mm |
| Installation conditions: B: | 11 mm |
| Installation conditions: F: | 30 mm |
| Operating voltage: | 10 ... 30 V |
| Switching frequency: | 0 ... 800 Hz |
| Hysteresis: | 0.04 ... 1.15 mm |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Overload resistance: | yes |
| Wire breakage protection: | yes |
| Inductive overvoltage protection: | yes |
| Surge suppression: | yes |
| Ripple: | 10 % |
| Voltage drop: | ≤ 2.5 V |
| Repeat accuracy: | 0.15 mm |
| Operating current: | 0 ... 200 mA |
| Off-state current: | 0.01 mA |
| No-load supply current: | ≤ 7 mA |
| Switching state indicator: | Multihole-LED, yellow |
| MTTFd: | 1935 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature: | -40 ... 100 °C (-40 ... 212 °F) |
| Connection type: | Connector M12 x 1 , 3-pin |
| Housing material: | brass, nickel-plated |
| Sensing face: | PBT |
| Housing diameter: | 18 mm |
| Degree of protection: | IP67 |
| Mass: | 50 g |
| ECCN: | |
| Kraj pochodzenia: | CZ |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |