236038
VAZ-G10-TERM
Terminal resistor
The passive terminator VAZ-G10-TERM in the G10-design includes two different terminations in one housing. With the two terminators, all topologies of an AS-Interface network can be terminated. The termination resistor Z1 offers the right impedance for most topologies. The termination resistor Z2 is used when Z1 does not reach the required signal quality improvement. Passive bus termination G10fa. Two LEDs per terminator monitor the status of each supply voltage. On the bus termination, the voltage is shown in 2 stages. The free flat cable channel can be used to monitor the external power supply UAUX.
| AS-Interface specification: | V3.0 |
| UL File Number: | E223772 "For use in NFPA 79 Applications only" |
| LED green: | AS-Interface voltage > 26 V: LED lights |
| LED yellow: | AS-Interface voltage > 18.5 V: LED lights |
| Rated operating voltage: | 18.5 ... 31.6 V |
| Rated operating current: | ≤ 15 mA per connection |
| Protection class: | III |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 62026-2:2013 EN 61326:2006 |
| Degree of protection: | EN 60529:2000 |
| Fieldbus standard: | EN 62026-2:2013 |
| Emitted interference: | EN 61000-6-4:2007 |
| AS-Interface: | EN 62026-2:2013 |
| Noise immunity: | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| UL approval: | cULus Listed, Type 1 enclosure |
| Electromagnetic compatibility: Maximum permissible ambient temperature: | max. 65 °C (max. 149 °F) |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Shock and impact resistance: | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Vibration resistance: | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Degree of protection: | IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
| Connection: | via Flat cable |
| Material: Housing: | PBT PC |
| Material: Mounting screw: | Stainless steel 1.4305 / AISI 303 |
| Mass: | 100 g |
| Tightening torque, fastening screws: | 1.65 Nm |
| ECCN: | |
| Kraj pochodzenia: | ID |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |