View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
231211
KFA6-DU-Ex1.D
Poproś o ofertę
Pepperl+Fuchs 231211
KFA6-DU-Ex1.D
Switch Amplifier, Timer Relay
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact and transistor output, Adjustable output timer functions from 10 ms .. 60 min, Input frequency up to 80 Hz; pulse divider up to 1 kHz, Reset function, Configurable by keypad, Line fault detection (LFD)pa. This isolated barrier is used for intrinsic safety applications. It is a highly configurable timer that accepts a digital signal (NAMUR sensor/mechanical contact) from a hazardous area and is commonly used in applications requiring on-delay, off-delay, one-shot, or pulse lengthening. The output relay switch duration is easily adjusted, and a pulse divider function allows step-down ratios from 1:1 to 9999:1. A reset can be activated via dry contact switch and used to terminate a particular time function. The unit is easily programmed by the use of a keypad located on the front of the unit. Line fault detection of the field circuit is indicated by a red LED. For additional information, refer to the manual and www.pepperl-fuchs.com.
Parametry techniczne
| Signal type: | Digital Input |
| Connection: | terminals 23, 24 |
| Rated voltage: | 230 V AC ± 10 % |
| Rated current: | 15 mA |
| Power consumption: | 4 VA |
| Connection side: | field side |
| Connection: | Input I: terminals 1+, 3- ; input II: terminals 13+, 14- |
| Input I: | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
| : Open circuit voltage/short-circuit current: | 8.2 V / 10 mA |
| : Switching point/switching hysteresis: | 1.2 ... 2.1 mA / approx. 0.2 mA |
| : Pulse duration: | min. 75 µs / 1 ms see instruction manuals; the maximum input frequency has to be observed. |
| : Input frequency: | 0 ... 80 Hz , pulse divider 0 ... 1 kHz |
| : Line fault detection: | breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA |
| Input II: | reset |
| : Active/Passive: | I > 3 mA / I < 1.5 mA |
| : Open circuit voltage/short-circuit current: | 12 V / 3.5 mA |
| : Pulse duration: | min. 10 ms |
| Connection side: | control side |
| Connection: | output I: terminals 10, 11, 12 ; output II: terminals 19+, 20- |
| Output I: | signal , Relay output |
| : Contact loading: | 253 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A |
| : Mechanical life: | 5 x 107 switching cycles |
| : Energized/De-energized delay: | approx. 20 ms / approx. 20 ms |
| Output II: | signal , electronic unit, isolated |
| : Contact loading: | 40 V / 50 mA |
| : Energized/De-energized delay: | after rising input flank 3 ms ; after falling input flank 2 ms |
| : Signal level: | 1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof) 0-signal: blocked output (off-state current ≤ 10 µA) |
| Input I: Resolution: | < 0.1 % of the set value, min. 10 ms |
| Input I: Accuracy: | 2 ms |
| Input I: Influence of ambient temperature: | 0.003 %/K (50 ppm) |
| Input I/other circuits: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output I/power supply and reset: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output I, II against eachother: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output II/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output II/reset: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff |
| Reset/power supply: | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Display elements: | LEDs , display |
| Control elements: | Control panel |
| Configuration: | via operating buttons |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Low voltage: Directive 2014/35/EU: | EN 61010-1:2010 |
| Electromagnetic compatibility: | NE 21:2006 |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Degree of protection: | IP20 |
| Connection: | screw terminals |
| Mass: | approx. 300 g |
| Dimensions: | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-Type Examination Certificate: | TÜV 99 ATEX 1408 |
| Low voltage: Marking: | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Supply: Maximum safe voltage: | 253 V AC (Attention! The rated voltage can be lower.) |
| Input I: | terminals 1+, 3-: Ex ia |
| Supply: Voltage Uo: | 10.1 V |
| Supply: Current Io: | 13.5 mA |
| Supply: Power Po: | 34 mW (linear characteristic) |
| Input II: | terminals 13+, 14- non-intrinsically safe |
| Supply: Maximum safe voltage Um: | 40 V (Attention! The rated voltage can be lower.) |
| Output I: | terminals 10, 11, 12 non-intrinsically safe |
| Supply: Contact loading: | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load (TÜV 99 ATEX 1408) 50 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load (TÜV 02 ATEX 1885 X) |
| Supply: Maximum safe voltage: | 253 V (Attention! The rated voltage can be lower.) |
| Output II: | terminals 19+, 20- non-intrinsically safe |
| Supply: Maximum safe voltage: | 40 V (Attention! The rated voltage can be lower.) |
| Certificate: | TÜV 02 ATEX 1885 X |
| Supply: Marking: | II 3G Ex nA nC IIC T4 Gc |
| Output I: Contact loading: | 50 V AC/2 A/cos φ > 0.7; 40 V DC/1 A resistive load |
| Galvanic isolation: Input I/other circuits: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| FM approval: Control drawing: | 116-0305 |
| UL approval: | E223772 |
| IECEx approval: | IECEx TUN 03.0000 |
| FM approval: Approved for: | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |