211977
UBEC300-18GH40-SE2-V1
Through-beam ultrasonic barrier
Short design, 40 mm, Stainless steel housing, Chemical-resistant, Series: -18GM, Housing: Stainless steel 1.4435 / AISI 316L. O-ring for cover sealing: EPDM, Output type: PNP, NO, Connection type: Connector M12 x 1 , 4-pinfa
| Sensing range: | 100 ... 300 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 255 kHz |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 20 mA |
| Input type: | 1 program input [receiver] switch point 1: -UB ... +1 V, switch point 2: +6 V ... +UB input impedance: > 4.7 kΩ pulse duration: ≥ 1 s 1 test input [emitter] emitter deactivated: +6 V ... +UB input impedance: > 4.7 kΩ |
| Output type: | PNP, NO |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 3 V |
| Switch-on delay: | < 5 ms |
| Switching frequency: | ≤ 100 Hz |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Degree of protection: | IP68 / IP69K |
| Material: Housing: | Stainless steel 1.4435 / AISI 316L O-ring for cover sealing: EPDM |
| Material: Transducer: | PTFE (diaphragm surface) |
| Mass: | 25 g |
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |