Pepperl+Fuchs
207107
ML4.2-54-F/40b/95/110
Pepperl+Fuchs 207107
ML4.2-54-F/40b/95/110
Retroreflective sensor
Opis
Retroreflective sensor for complex applications, miniature design, polarization filter, 6 m detection range, red light, light/dark on, push-pull output, M8 plug, High-precision sensors for complex applications, Miniature design with very robust and versatile mounting options, Optical surface made of scratch-resistant glass for areas that are prone to high levels of dirt, Objects can be reliably detected down to 0 mm: no blind zone, Small, sharp light spotfa. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Parametry techniczne
| Effective detection range: | 0 ... 5 m |
| Reflector distance: | 0 ... 5 m |
| Threshold detection range: | 6 m |
| Reference target: | H85-2 reflector |
| Light source: | LED |
| Light type: | modulated visible red light , 660 nm |
| Polarization filter: | yes |
| Angle deviation: | max. ± 1° |
| Diameter of the light spot: | approx. 40 mm at detection range 1 m |
| Angle of divergence: | 1.7 ° |
| Ambient light limit: Continuous light: | 40000 Lux |
| Ambient light limit: Modulated light: | 5000 Lux |
| MTTFd: | 1940 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator: | LED yellow: switching state ; Stability control |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA at 24 V DC |
| Switching type: | light/dark on electrically switchable |
| Signal output: | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA |
| Voltage drop: | ≤ 2.5 V DC |
| Switching frequency: | 1 kHz |
| Response time: | 500 µs |
| Product standard: | EN 60947-5-2 |
| Standard conformity: Shock and impact resistance: | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Standard conformity: Vibration resistance: | IEC / EN 60068-2-6. Sinus. 10 -2000 Hz, 10 g in each X, Y and Z directions |
| CE conformity: | yes |
| EAC conformity: | TR CU 020/2011 |
| UL approval: | cULus Listed |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 13.9 mm |
| Housing height: | 31.4 mm |
| Housing depth: | 18 mm |
| Degree of protection: | IP67 / IP69K |
| Connection: | M8 x 1 connector, 4-pin |
| Material: Housing: | ABS |
| Material: Optical face: | glass pane |
| Mass: | approx. 10 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,02 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |