Pepperl+Fuchs
199493-0008
KT-MB-DMA
Pepperl+Fuchs 199493-0008
KT-MB-DMA
Advanced Diagnostic Module, Kit for Stand-Alone Operation
Opis
Comprehensive diagnostics for the fieldbus physical layer, Module and motherboard for retrofit of any installation, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PApa. The kit of FieldConnex. Advanced Diagnostic Module (ADM) and motherboard is a comprehensive measurement tool for the physical layer for retrofitting of up to four fieldbus segments. Its passive input circuits leave the physical layer untouched for exact data. The ADM detects gradual or sudden changes and helps trace even intermittent malfunctions. The ADM supports commissioning, online monitoring and troubleshooting. It can be integrated tightly into the DCS and PAM via a separate diagnostic bus, making the fieldbus physical layer itself a managable asset. Configuration tools automate setup of the ADM and of selected DCS. The Diagnostic Manager is the software for display and operation from the safety of the control room. The Professional Edition provides powerful functions and wizards simplifying and automating work procedures: an embedded expert system, a data historian, and a built-in oscilloscope (see datasheet DTM-FC.AD*).
Parametry techniczne
| Design / Mounting: | Motherboard based |
| Rated voltage: | 19.2 ... 35 V |
| Rated current: | 110 ... 30 mA |
| Power dissipation: | max. 2 W |
| Number of segments: | 4 |
| Fieldbus type: | FOUNDATION Fieldbus/PROFIBUS PA |
| LED PRI PWR: | green: on, primary bulk power supply connected |
| LED SEC PWR: | green: on, secondary bulk power supply connected |
| LED Seg 1...4: | yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error |
| Fault signal: | VFC alarm 1 A, 50 V DC, normally closed |
| DIP switch: | diagnostic address 1...247, binary coded |
| Interface type: | diagnostic bus: RS 485 |
| Electromagnetic compatibility: Directive 2004/108/EC: | EN 61326-1:2006 |
| Electromagnetic compatibility: | NE 21 |
| Degree of protection: | IEC 60529 |
| Shock resistance: | EN 60068-2-27 |
| Vibration resistance: | EN 60068-2-6 |
| Ambient temperature: | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity: | < 95 % non-condensing |
| Shock resistance: | 15 g 11 ms |
| Vibration resistance: | 1 g , 10 ... 150 Hz |
| Connection type: | screw terminals |
| Core cross-section: | 2.5 mm2 |
| Housing material: | Polycarbonate |
| Housing width: | 50 mm |
| Housing height: | 220 mm |
| Housing depth: | 162 mm |
| Degree of protection: | IP20 |
| Mass: | approx. 290 g |
| Mounting: | DIN mounting rail |
| FM approval: FM certificate: | FM 19 US 0015 X and FM 19 CA 0011 X |
| FM approval: FM marking: | AEx/Ex ec IIC T4 |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Singapur |
| EAN: | 4050143061037 |
| Waga: | 0,90 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |