198343
V1S-G-Q2
Field-attachable male connector
Field-attachable male QUICKON-ONE connectorfa. It normally takes a lot of time to connect freely configurable M12 round connectors to the sensor cable. QUICKON can reduce this time to a minimum; the individual wire conductors do not have to be stripped anymore. For contacting, a blade contact cuts through the conductor insulation and applies contact to the wire strands. This contact is spring-loaded, vibration-proof and gas-tight. The QUICKON M12 connector is available as a female or male 4-pin straight plug. In this way, individual sensor-actuator cables with several wires can be put together quickly and economically.
| Number of pins: | 4 |
| Connection 1: | Male connector |
| Construction type 1: | straight |
| Threading 1: | M12 |
| UL File Number: | E191152 |
| Operating voltage: | max. 250 V |
| Operating current: | max. 4 A |
| Volume resistance: | < 5 mΩ |
| UL approval: | E191152 |
| Ambient temperature: | -25 ... 80 °C (-13 ... 176 °F) |
| Pollution degree: | 3 |
| Degree of protection: | IP65/IP67 |
| Material: Contacts: | CuSn |
| Material: Contact surface: | Ni/Au |
| Material: Body: | PA 66, black |
| Material: Sleeve connector: | Zinc die-casting, nickel-plated |
| Material: Seal: | NBR |
| Material: Core insulation: | PVC/PE/PP |
| Cable: Sheath diameter: | 4 ... 8 mm |
| Cable: Cores: | ∅ 1.3 ... 2.6 mm incl. insulation Cross-section: 0.34 ... 0.75 mm2 Cable construction: Class 2-6 in accordance with VDE 0295 |
| Mounting: | Max. tightening torque on the coupling nut: ≤ 1.2 Nm |
| Flammability: | 94 V-0 |
| Note: | max. 10 connections possible to a cable of the same cross-section. After repeated cable connection it may be necessary to renew the seal and cap. |
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |