197204
UBC250-12GM-E5-V1
Ultrasonic sensor
High chemical resistance through PTFE coated transducer surface, Stainless Steel enclosure, 1 switch output, Series: -12GM, Housing: stainless steel 1.4404 / AISI 316L. O-ring for cover seal: Viton, Connection type: Connector M12 x 1 , 4-pinfa
| Sensing range: | 30 ... 250 mm |
| Adjustment range: | 50 ... 250 mm |
| Dead band: | 0 ... 30 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 310 kHz |
| Response delay: | approx. 50 ms |
| Operating voltage: | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | ≤ 30 mA |
| Input type: | 1 program input lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s |
| Output type: | 1 switch output PNP Normally open/closed , programmable |
| Rated operating current: | 100 mA , short-circuit/overload protected |
| Default setting: | Switch point A1: 50 mm Switch point A2: 250 mm |
| Voltage drop: | ≤ 3 V |
| Repeat accuracy: | ≤ 1 % |
| Switching frequency: | ≤ 8 Hz |
| Range hysteresis: | 1 % of the set operating distance |
| Temperature influence: | ± 1.5 % of full-scale value |
| UL approval: | cULus Listed, Class 2 Power Source |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Degree of protection: | IP68 / IP69K |
| Material: Housing: | stainless steel 1.4404 / AISI 316L O-ring for cover seal: Viton |
| Material: Transducer: | PTFE (diaphragm surface) |
| Mass: | 35 g |
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |