195047
HIATB01-FAULT-01
H-System Accessory
This Fault Indication Board is designed to monitor up to 16 H-System Termination Boards. The fault bus signal can be wired in a ring (daisy chain) or redundant in a star. A failed power supply or line faults in the field are displayed on the Fault Indication Board via an LED and are made available through a potential-free contact.
| Rated voltage: | 19.6 ... 30 V DC |
| Ripple: | ≤ 10 % |
| Power dissipation: | ≤ 500 mW , without modules |
| Reverse polarity protection: | yes |
| Supply: | Redundancy available. Each supply is decoupled. |
| Output type: | volt-free contact |
| Contact loading: | 30 V DC , 1 A |
| Display elements: | LED Power (power supply), green LED LED Supply I (missing supply I), red LED LED Supply II (missing supply II), red LED LED Fault (fault signal), red LED |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2012 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP20 |
| Connection: Supply: | pluggable screw terminals , black |
| Connection: Fault output: | pluggable screw terminals , black |
| Core cross-section: | screw terminals: 0.2 ... 2.5 mm2 (24 ... 12 AWG) |
| Material: | housing: polycarbonate, 10 % glass fiber reinforced |
| Mass: | approx. 150 g |
| Dimensions: | 50 x 200 x 60 mm (1.97 x 7.9 x 2.36 inch) , height including module assembly |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| ECCN: | |
| Kraj pochodzenia: | Singapur |
| EAN: | 4050143060924 |
| Waga: | 0,21 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |