192999
UDC-18GM-400-3E3
Double sheet sensor
Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers, No TEACH-IN required, Function indicators visible from all directionsfa
| Sensing range: | 20 ... 60 mm , optimal distance: 45 mm |
| Transducer frequency: | 395 kHz |
| LED green: | indication: single sheet detected |
| LED yellow: | Indication: No sheet detected (Air) |
| LED red: | indication: double sheet detected |
| Operating voltage: | 18 ... 30 V DC , ripple 10 %SS |
| No-load supply current: | < 80 mA |
| Input type: | Function input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB |
| Pulse length: | ≥ 100 ms |
| Impedance: | ≥ 4 kΩ |
| Output type: | 3 switch outputs PNP, NC |
| Rated operating current: | 3 x 100 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 2 V |
| Switch-on delay: | approx. 15 ms (shorter response time on request) |
| Switch-off delay: | approx. 15 ms (shorter response time on request) |
| Pulse extension: | min. 120 ms programmable |
| UL approval: | cULus Listed, General Purpose, Class 2 Power Source |
| CSA approval: | cCSAus Listed, General Purpose, Class 2 Power Source |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | 0 ... 60 °C (32 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Connection type: | cable PVC , 2 m |
| Core cross-section: | 0.14 mm2 |
| Degree of protection: | IP67 |
| Material: Housing: | nickel plated brass; plastic components: PBT |
| Material: Transducer: | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass: | 150 g |
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |