View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
181737
RL28-55-LAS-2840/47/115b
Poproś o ofertę
Pepperl+Fuchs 181737
RL28-55-LAS-2840/47/115b
Retroreflective sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Retroreflective sensor with polarization filter, Visible red light, pulsed LASER light, High operating range, Ultra bright LEDs for power on, weak signal indication and switching state, Not sensitive to ambient light, even with switched energy saving lamps, Protection class IIfa
Parametry techniczne
| Effective detection range: | 0 ... 30 m |
| Reflector distance: | 0.3 ... 30 m |
| Threshold detection range: | 42 m |
| Reference target: | MH82 reflector |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 650 nm |
| Laser nominal ratings: Beam divergence: | < 1.5 mrad |
| Laser nominal ratings: Pulse length: | approx. 4.5 µs |
| Laser nominal ratings: Repetition rate: | approx. 6 kHz ... 20 kHz |
| Laser nominal ratings: max. pulse energy: | 4 nJ |
| Diameter of the light spot: | approx. 45 mm at 30 m |
| Angle of divergence: | Emitter: < 0.1 ° Receiver: < 2 ° |
| Ambient light limit: | 50000 Lux |
| MTTFd: | 560 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements: | sensitivity adjustment (Adjustment to < 25% of the effective operating range) |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | ≤ 35 mA |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Switching type: | light on |
| Signal output: | 2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 200 mA |
| Voltage drop: | ≤ 2.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1 |
| Protection class: | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 54.3 mm |
| Degree of protection: | IP67 |
| Connection: | fixed cable 230 mm with M12 x 1 male connector, 4-pin |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | Plastic pane |
| Mass: | 80 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |