View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
180708
RL28-8-H-1500-LAS/47/105
Poproś o ofertę
Pepperl+Fuchs 180708
RL28-8-H-1500-LAS/47/105
Background suppression sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Background suppression sensor, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Laser version for long ranges, Small light beam diameter for detection of small partsfa
Parametry techniczne
| Detection range: | 100 ... 1500 mm |
| Detection range min.: | 50 ... 200 mm |
| Detection range max.: | 100 ... 1500 mm |
| Background suppression: | max. + 10 % of the upper limit of the detection range |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 650 nm |
| Laser nominal ratings: Beam divergence: | < 1.5 mrad |
| Laser nominal ratings: Pulse length: | 4.5 µs |
| Laser nominal ratings: Repetition rate: | approx. 1.5 kHz |
| Laser nominal ratings: max. pulse energy: | 17 nJ |
| Light spot representation: | max. 1.5 mm x 4 mm , light spot perpendicular to housing |
| Black/White difference (6 %/90 %): | ≤ 40 % |
| Ambient light limit: | 50000 Lux |
| MTTFd: | 590 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow ON: object inside the scanning range OFF: object outside the scanning range |
| Control elements: | Sensing range adjuster , Light-on/dark-on changeover switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | 10 % |
| No-load supply current: | ≤ 40 mA |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Time delay before availability: | ≤ 2 s |
| Switching type: | light/dark on, switchable |
| Signal output: | 2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 200 mA |
| Switching frequency: | 140 Hz |
| Response time: | 3.5 ms |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1 |
| Protection class: | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval: | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -25 ... 75 °C (-13 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 54.3 mm |
| Degree of protection: | IP67 |
| Connection: | 5-pin, M12 x 1 plastic connector |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | Plastic pane |
| Mass: | approx. 70 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |