Pepperl+Fuchs
134128
RLK28-55-LAS-Z/31/116
Pepperl+Fuchs 134128
RLK28-55-LAS-Z/31/116
Retroreflective sensor
Opis
The series 28 family of sensors can be universally used. It has a large range of models that allows it to be integrated into any automation environment. The sensors are contained in sturdy water resistant plastic housings with multiple fastening options and scratch resistant optical cover. Features such as a timer function, and functions including a light/dark switch, sensitivity adjuster and highly visible status LEDs make for less effort on the part of the user and streamline installation, setup and operation. Just about any task associated with positioning, moving, conveying and monitoring can be accomplished with these sensors. Retroreflective sensor with polarization filter, Universal series with highly versatile fields of use, Resistant against noise: reliable operation under all conditions, Programmable time function GAN, GAB, IAB, as well as GAN-GAB and GAN-IAB as double function, Laser version for long ranges, Version with relay outputfa
Parametry techniczne
| Effective detection range: | 0 ... 30 m |
| Reflector distance: | 0.3 ... 30 m |
| Threshold detection range: | 42 m |
| Reference target: | MH82 reflector |
| Light source: | laser diode |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Laser nominal ratings: Note: | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser nominal ratings: Laser class: | 1 |
| Laser nominal ratings: Wave length: | 650 nm |
| Laser nominal ratings: Beam divergence: | < 1.5 mrad |
| Laser nominal ratings: Pulse length: | approx. 4.5 µs |
| Laser nominal ratings: Repetition rate: | approx. 6 kHz ... 20 kHz |
| Laser nominal ratings: max. pulse energy: | 4 nJ |
| Diameter of the light spot: | approx. 45 mm at 30 m |
| Angle of divergence: | Emitter: < 0.1 ° Receiver: < 2 ° |
| Ambient light limit: | 50000 Lux |
| MTTFd: | 450 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green |
| Function indicator: | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements: | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Operating voltage: | 12 ... 240 V AC/DC |
| Power consumption: | ≤ 3.5 VA |
| Switching type: | light/dark on switchable |
| Signal output: | Relay, 1 alternator |
| Switching voltage: | max. 250 V AC/DC |
| Switching current: | max. 2 A |
| Switching power: | DC: max. 50 W AC: max. 500 VA |
| Switching frequency: | 25 Hz |
| Response time: | 20 ms |
| Timer function: | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.1 ... 10 s |
| Product standard: | EN 60947-5-2 |
| Laser safety: | EN 60825-1 |
| EAC conformity: | TR CU 020/2011 TR CU 004/2011 |
| Protection class: | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140. Caution! The protection class 2 is only valid when the terminal compartment is closed. |
| UL approval: | E87056 , cULus Listed Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508. |
| CCC approval: | Certified by China Compulsory Certification (CCC) |
| FDA approval: | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient temperature: | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature: | -20 ... 75 °C (-4 ... 167 °F) |
| Housing width: | 25.8 mm |
| Housing height: | 88 mm |
| Housing depth: | 65.5 mm |
| Degree of protection: | IP67 |
| Connection: | terminal compartment with 8 spring-loaded terminals for wire cross section 0.5 ... 1.5 mm2 , Insulation stripping 7.5 ... 8.5 mm , M16 x 1.5 cable gland |
| Material: Housing: | Plastic ABS |
| Material: Optical face: | Plastic pane |
| Mass: | 112 g |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |