View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
130539
NCN40-FP-W-T-P1
Poproś o ofertę
Pepperl+Fuchs 130539
NCN40-FP-W-T-P1
Inductive sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Series: Rectangular type, Housing material: PBT, Output type: 2-wire, Installation: non-flush, Type of voltage: AC, Connection type: screw terminals, Degree of protection: IP68fa
Parametry techniczne
| Switching function: | Normally open/closed (NO/NC) |
| Output type: | Two-wire |
| Rated operating distance: | 40 mm |
| Installation: | non-flush |
| Output polarity: | AC |
| Assured operating distance: | 0 ... 32.4 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.85 |
| Output type: | 2-wire |
| Operating voltage: | 20 ... 253 V |
| Switching frequency: | 0 ... 20 Hz |
| Hysteresis: | typ. 3 % |
| Short-circuit protection: | no |
| Voltage drop: | ≤ 5 V typ. 4V |
| Momentary current (20 ms, 0.1 Hz): | max. 3000 mA |
| Temperature drift: | -10 ... 15 % at < -25 °C |
| Operating current: | 5 ... 500 mA |
| Off-state current: | 0.3 ... 1 mA typ. 0.7 mA |
| Time delay before availability: | ≤ 100 ms |
| Operating voltage indicator: | LED, green |
| Switching state indicator: | LED, yellow |
| Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | Certified by China Compulsory Certification (CCC) |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Connection type: | screw terminals |
| Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section: | up to 2.5 mm2 |
| Standard conformity: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
| Standard conformity: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
| Housing material: | PBT |
| Sensing face: | PBT |
| Housing base: | PBT |
| Degree of protection: | IP68 |
| Note: | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | Indonesien |
| EAN: | 4050143014132 |
| Waga: | 0,44 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |