Pepperl+Fuchs
129640
VAA-4E4A-CB-ZE/E2-Y129640
Pepperl+Fuchs 129640
VAA-4E4A-CB-ZE/E2-Y129640
AS-Interface printed circuit board module
Opis
Circuit board module. 4 inputs/4 outputsfa. The AS-Interface printed circuit board module is intended for use in backplane applications that offer the possibility of highly flexible configuration with additional plug-in modules. Mounting and contact are achieved by plugging into a plug-in slot on the backplane side (Card Edge Type AMP 145432-2). Mechanical coding protects the printed circuit board modules against being inserted incorrectly, thus reversing polarity. Mechanical locking in the connector prevents the printed circuit board module from accidentally coming loose after it has been plugged in. Power must be supplied externally to the inputs and outputs connected to the module through an auxiliary power source. Power is supplied to the module itself from the AS-Interface circuit. This is indicated by an LED. The inputs are galvanically separated from each other and from the outputs. The current switching state of each input and output is indicated by the corresponding IN and OUT LEDs. The "periphery error" function as well as the FAULT LED will report an overloading of the outputs to the AS-Interface master. Communication over the AS-Interface remains in effect. Note:. A communication monitoring system is integrated that deenergises the outputs if no communication is taking place on the AS-Interface line.
Parametry techniczne
| Slave type: | Standard slave |
| AS-Interface specification: | V2.1 |
| LED FAULT: | error display; LED red red: communication error or address is 0 red flashing: overload of outputs |
| LED PWR: | AS-Interface voltage; LED green |
| LED AUX: | ext. auxiliary voltage UAUX ; LED green |
| LED IN: | switching state (input); 4 LED yellow |
| LED OUT: | Switching state (output); 4 LED yellow |
| Auxiliary voltage (input): | 20 ... 30 V DC PELV |
| Auxiliary voltage (output): | 20 ... 30 V DC PELV |
| Rated operating voltage: | 26.5 ... 31.6 V from AS-Interface |
| Rated operating current: | ≤ 40 mA |
| Protection class: | III |
| Number/Type: | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Supply: | from external auxiliary voltage UEXT |
| Input current: | ≤ 8 mA (limited internally) |
| Switching point: | according to EN 61131-2 Type 2 |
| : 0 (unattenuated): | ≤ 2 mA |
| : 1 (attenuated): | ≥ 4 mA |
| Number/Type: | 4 electronic outputs, PNP |
| Supply: | from external auxiliary voltage UAUX |
| Current: | ≤ 700 mA per output |
| Degree of protection: | EN 60529:2000 |
| AS-Interface: | EN 62026-2:2013 |
| Profile: | S-7.0 |
| IO code: | 7 |
| ID code: | 0 |
| ID1 code: | F |
| ID2 code: | E |
| Data bits (function via AS-Interface): | input output |
| : D0: | IN1 OUT1 |
| : D1: | IN2 OUT2 |
| : D2: | IN3 OUT3 |
| : D3: | IN4 OUT4 |
| Parameter bits (programmable via AS-i): | function |
| : P0: | not used |
| : P1: | not used |
| : P2: | not used |
| : P3: | not used |
| Ambient temperature: | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Connection: | Card edge connector, type AMP 145432-2 |
| Mass: | approx. 13 g |
| Dimensions: | 65.7 mm x 40 mm x 8 mm |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |