123392
NCB1,5-12GM45-E2-D-V1
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin, Degree of protection: IP68fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 1.5 mm |
| Installation: | flush |
| Output polarity: | DC |
| Operating voltage: | 10 ... 30 V DC |
| Switching frequency: | 0 ... 600 Hz |
| Hysteresis: | typ. 8 % |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 2 V |
| Operating current: | 0 ... 200 mA |
| No-load supply current: | ≤ 10 mA |
| Operating pressure: | 500 bar (7252 psi) |
| Peak pressure: | 1000 bar (14504 psi) |
| MTTFd: | 728 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
| Connection type: | Connector M12 x 1 , 4-pin |
| Housing material: | Stainless steel 1.4305 / AISI 303 |
| Sensing face: | Ceramic |
| Housing diameter: | 12 mm |
| Degree of protection: | IP68 |
| Mass: | 27 g |
| ECCN: | |
| Kraj pochodzenia: | CH |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |