120835
NBN3-F1CS7-3E2-2V1
Inductive power clamp sensor
Series: Rectangular type, Housing material: PA 6. Metal fixing block for M6-screw, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin ,, Degree of protection: IP65fa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 3 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 2.4 mm |
| Reduction factor rAl: | 0.4 |
| Reduction factor rCu: | 0.3 |
| Reduction factor r304: | 0.7 |
| Operating voltage: | 10 ... 30 V DC |
| Switching frequency: | 0 ... 500 Hz |
| Reverse polarity protection: | reverse polarity protected |
| Short-circuit protection: | pulsing |
| Voltage drop: | ≤ 3 V |
| Operating current: | 0 ... 100 mA |
| Off-state current: | 0 ... 0.5 mA typ. |
| No-load supply current: | ≤ 10 mA |
| Operating voltage indicator: | 1 green LED green for each sensor |
| Switching state indicator: | 1 yellow LED for each sensor |
| UL approval: | cULus Listed, General Purpose |
| CSA approval: | cCSAus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | 0 ... 50 °C (32 ... 122 °F) |
| Connection type: | Connector M12 x 1 , 4-pin , |
| Housing material: | PA 6 Metal fixing block for M6-screw |
| Degree of protection: | IP65 |
| Note: | El. Data for each sensor Available accessory: Clear view cover SH-F1C |
| ECCN: | |
| Kraj pochodzenia: | Deutschland |
| EAN: | 4050143183128 |
| Waga: | 0,21 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |