036504
NJ8-18GM-N-V1-Y36504
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4305 / AISI 303, Output type: 2-wire, Installation: non-flush, Type of voltage: DC, Connection type: Connector M12 x 1 , 4-pin, Degree of protection: IP67fa
Switching function: | Normally closed (NC) |
Output type: | NAMUR |
Rated operating distance: | 8 mm |
Installation: | non-flush |
Assured operating distance: | 0 ... 6.48 mm |
Reduction factor rAl: | 0.4 |
Reduction factor rCu: | 0.3 |
Reduction factor r304: | 0.85 |
Nominal voltage: | 8.2 V (Ri approx. 1 kΩ) |
Operating voltage: | 5 ... 25 V |
Switching frequency: | 0 ... 200 Hz |
Hysteresis: | 3 % |
Current consumption: Measuring plate not detected: | min. 3 mA |
Current consumption: Measuring plate detected: | ≤ 1 mA |
Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
Connection type: | Connector M12 x 1 , 4-pin |
Housing material: | Stainless steel 1.4305 / AISI 303 |
Sensing face: | PBT |
Housing diameter: | 18 mm |
Degree of protection: | IP67 |
ECCN: | |
Kraj pochodzenia: | ID |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |