50138121
IS 218FM/4NC.5-5E0
IS 218FM/4NC.5-5E0 - Inductive switch
| Series: | 218 |
| Typ. operating range limit Sn: | 5 mm |
| Operating range Sa: | 0 ... 4 mm |
| Special version: | Reduction factor 1 |
| Protective circuit: | Short circuit protected, Inductive protection, Polarity reversal protection |
| Supply voltage UB: | 10 ... 30 V, DC |
| Residual ripple: | 0 ... 20 %, From UB |
| Open-circuit current: | 0 ... 10 mA |
| Temperature drift, max. (in % of Sr): | 10 %, Over the entire operating temperature range |
| Repeatability, max. (in % of Sr): | 5 %, For UB = 20 … 30 V DC, ambient temperature Ta = 23 °C ± 5 °C |
| Switching hysteresis: | 15 % |
| Number of digital switching outputs: | 1 Piece(s) |
| Voltage type: | DC |
| Switching current, max.: | 200 mA |
| Residual current, max.: | 0.1 mA |
| Voltage drop: | ≤ 2 V |
| Switching element: | Transistor, PNP |
| Switching principle: | NC (normally closed) |
| Switching frequency: | 100 Hz |
| Number of connections: | 1 Piece(s) |
| Number of connections: | 1 Piece(s) |
| Function: | Voltage supply, Signal OUT |
| Cable length: | 2,000 mm |
| Sheathing material: | PUR |
| Sheathing material: | PUR |
| Number of conductors: | 3 -wire |
| Wire cross section: | 0.34 mm² |
| Design: | Cylindrical |
| Thread size: | M18 x 1 mm |
| Thread size: | M18 x 1 mm |
| Type of installation: | Embedded |
| Housing material: | Stainless steel, V2A |
| Housing material: | Stainless steel, V2A |
| Sensing face material: | Stainless steel, AISI 303 |
| Housing color: | Silver |
| Housing color: | Silver |
| Type of fastening: | Via optional mounting device, Mounting thread |
| Standard measuring plate: | 18 x 18 mm², Fe360 |
| Number of LEDs: | 1 Piece(s) |
| Ambient temperature, operation: | -25 ... 70 °C |
| Degree of protection: | IP 69K, IP 68 |
| Degree of protection: | IP 69K, IP 68 |
| Test procedure for EMC in accordance with standard: | IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4 |
| Standards applied: | IEC 60947-5-2 |
| Standards applied: | IEC 60947-5-2 |
| Stainless steel: | 0.7 |
| Stainless steel: | 0.7 |
| Copper: | 0.8 |
| Fe360 steel: | 1 |
| Customs tariff number: | 85365019 |
| eCl@ss 8.0: | 27270101 |
| eCl@ss 9.0: | 27270101 |
| ETIM 5.0: | EC002714 |
| ETIM 6.0: | EC002714 |
| ETIM 6.0: | EC002714 |
| ECCN: | |
| Kraj pochodzenia: | China |
| EAN: | |
| Waga: | 0,12 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |