212880
US 12 M 150 FB IU-B4
Ultrasonic Sensor
IO-Link. Can be configured as ultrasonic diffuser, ultrasonic barrier or for the analog distance measurement. 3 different teach modes. Scanning range adjustable. Analog output. Narrow detection beam / no blind zone due to focus nozzle. Switching functions: NO/NC, frame function teachable. Insensitive to dirt. Small design. Robust metal casing. Protection class IP 67
Operating principle: | Ultrasonic sensor, Ultrasonic barrier, configurable via IO-Link |
Evaluation: | analog, digital (via IO-Link) |
Operating modes: | Default, Master/Slave function (synchronization or multiplex mode) |
Size: | M12 x 1 (thread) |
Design: | screw |
Sending axis: | axial |
Characteristics: | Focus nozzle |
Nominal switching distance (Sn): | 150 mm |
Standardized measuring plate: | 20 x 20 mm |
Service voltage: | 18 ... 30 V DC |
No-load current: | < 40 mA, (24 V DC) |
Adjustment range: | 0 ... 150 mm, adjustable |
Resolution: | Ø 1,0 mm, Set measuring range / 4095 (analogue output) |
Sensitivity adjustment: | Remote teach |
Mounting distance: | > 60 mm (Sensor to sensor) |
Switching output: | Push pull, 150 mA |
Max. power operating: | 150 mA |
Switching hysteresis: | 2 mm, via IO-Link adjustable up to 20 mm |
Analog output: | 0 ... 10 V, 4 ... 20 mA |
Sound frequency: | 400 kHz |
Interface: | IO-Link, V1.1, COM2 (38,4kBd), Smart Sensor Profile |
Inverse polarity protection: | Yes |
Display: | 2 x LED yellow (Display output), 2 x LED green (status) |
Voltage drop: | < 2,0 V |
Switching frequency: | 20 Hz |
Short-circuit protection: | yes |
Reproducibility: | < 0,5 mm |
Linearity error: | < 0,4 % / Sn max. |
Readiness delay: | < 300 ms |
Ambient temperature, operation: | -25 … +70 °C |
Temperature drift: | 0.2 %/K (uncompensated), < 1 %/Sn (compensated) |
Load resistance: | > 10 KΩ (0 ... 10 V) / < 400 Ω (4 ... 20 mA) |
Insulation voltage endurance: | 500 V |
Protection class: | IP 67 |
Protection degree: | III, operation on protective low voltage |
Casing material: | brass nickel plated |
Material: | epoxy resin, PUR (Transducer surface) |
Connection: | Connector, M12, 4-poled |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |