FC1100
FC1100 | PCI EtherCAT slave card
The FC1100 PCI EtherCAT card can be used to integrate a PC as a slave in an EtherCAT network. The card has an EtherCAT channel with two ports (IN/OUT) and is also supported in the ET9300 EtherCAT Slave Stack Code. The FC1100 can therefore also be used for the development of EtherCAT slave software on the PC.
Fieldbus: | EtherCAT (direct mode) |
EtherCAT plug: | 2 x RJ45, EtherCAT IN/OUT |
Data transfer rates: | 100 Mbit/s |
Interface to the PC: | PCI 32 bit |
EtherCAT Slave Controller: | ET1100 |
RAM: | 8 kbyte |
SYNC manager: | 8 |
FMMUs: | 8 |
Cable length: | up to 100 m |
Hardware diagnosis: | 2 LEDs per channel (activity, link) |
Dimensions: | approx. 65 mm x 125 mm |
Operating temperature: | 0…+55 °C |
Driver: | TwinCAT driver for EtherCAT, support in the EtherCAT Slave Stack Code ET9300 |
ECCN: | |
Kraj pochodzenia: | |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |